WyreStorm HDBaseT Extender Set with Integrated 2.1 Audio Amplifer Kit (70m/230ft)

Categories:
Part Number EX-1UTP-IR-70-AMP

Transmit.  Receive.  Amplify.  Extend. 

The WyreStorm EX-1UTP-IR-70-AMP is a single cable extender set, and then some.

Comprising of a Class B 70m HDBaseT transmitter with bidirectional control via IR and RS232 and the award-winning WyreStom HDBaseT Digital Amplifier as the receiving device, the EX-1UTP-IR-70-AMP enables a single HDMI source to be distributed over distance, with the flexibility of the AMP offering superior audio and control capabilities at the display zone. 

The inclusion of the AMP as a receiving device also opens up further opportunities to extend transmission over HDBaseT up to 7 times for scalable single source distribution, with each display point benefiting from two-way IR, addressable serial control along with 3:1 audio switching including local audio input, ARC and 25w 2.1ch audio functionality of the AMP – all over a single Cat5e/6 cable.

 

Award

 

Overview

See video

Want to distribute an HDMI source to up to 7 screens covering total distances up to 500m with superior audio capabilities and enhanced control but don’t need a matrix switcher?  

Functioning essentially as a one-output matrix, the EX-1UTP-IR-70-AMP extender set consists of an HDBaseT 70m/230ft Transmitter paired with the groundbreaking WyreStorm AMP-001-010 HDBaseT Class D Digital Audio Amplifier as a receiving and repeating device for the most effective and flexible method of single-cable distribution and control of an individual source available.

Connecting the HDMI source to the HDBaseT transmitter enables the source to be transmitted over HDBaseT and received by the AMP-001-010, where the transmission can be broken out via HDMI to a local display as well as repeated a further 70m/230ft to additional AMPs if desired, up to 7 times for distribution spanning up to half a kilometer or a third of a mile in total.

In terms of control, the EX-1UTP-IR-70-AMP features full control of source, display and AMP via bidirectional IR and addressable serial control of the AMP, with control protocols available for all leading control systems.

The AMP itself is a compact, feature rich and highly versatile device that simplifies, combines and improves the relationship between HDMI, HDBaseT and stereo audio for integrators. 

Whether distributing from the HDBaseT transmitter to one or multiple AMPs, each incorporates 3:1 audio switching from a centralized AV source, ARC or a locally connected audio input, such as an iPod, Sonos, or laptop, and can be used centrally, in-line or as a display device for one of the most powerful versatile applications of HDBaseT technology around.

Including 2.1 audio amplification with sub-woofer and analogue stereo pre-outs, the AMP offers superior audio to commercial TV displays with significant improvements in amplification sound replication at display zones offered by 25w per channel stereo and sub-woofer outputs for a sound that really delivers.

Click here for more information on the AMP-001-010 and see just what this small but perfectly formed device is capable of.

Whatever your installation needs, if distribution of an AV source over distance to one or multiple display zones with local input at every location, superior audio and control functionality is required, the EX-1UTP-IR-70-AMP offers the most versatile and innately scalable HDBaseT solution available at this or indeed any price point.

Features

  • Transmits 1080p HD @60Hz and HD multichannel audio from a single HDMI source up to 70m/230ft under recommended conditions*
  • HDMI Input > HDBaseT Output, HDBaseT Input > HDBaseT / HDMI Output
  • Combined HDBaseT Transmitter, Receiver, Repeater and Class D audio amplifier – all-in-one
  • Discrete wide-band bidirectional IR control and fully addressable serial control of AMP via signal transmitted together within the HDMI signal over a single Cat5e/6cable to control source, display and AMP.
  • RS232 Commands (Tx, Rx, Gnd) sent with HD Audio & Video contained within single Cat5e/6
  • Centralized RS232 for firmware updates or third party control with open source integration protocols available for market leading control systems
  • 3:1 Audio switching/receiver – Audio from centralized source via HDBaseT Transmitter Audio Return Channel (ARC) or Local Audio Input via 3.5mm
  • AMP may be used centrally with AV source, In-line close to speakers, wall mounted near data connections or locally at display location
  • Fully cascadable up to 7 times to further lengthen transmission and increase your distribution capabilities - 70m/230ft to AMP > a further 70m/230ft to additional AMP x 7
  • HDMI output for direct connection of HD display either in-line to each AMP connected or at the end of the run
  • 2.1 stereo audio at 25w per channel with left/right spring terminal connections for speakers
  • RCA Subwoofer output connection
  • EDID management and pre-sets via DIP switch
  • LED indication for visual power, video signal status, audio source selection - HDBaseT, Local or ARC
  • Fully supports 3D applications (frame sequential – Blu-ray and Interlaced Stereoscopic – Satellite/cable broadcasts)
  • Supports 36bit Deep Colour
  • HDBaseT Transmitter powered by 5v mains adapter or with the 5v USB power cable to solve space or power availability problems at source location as well as being more energy efficient as the transmitter is only powered when the source is turned on.
  • 50m/164ft Power-over-HDBaseT Passthrough to PoH enabled display receivers
  • HDMI V1.4
  • Cable termination follows IEEE-568B standards
  • HDCP compliant
  • Automatically adjusts feedback, equalization and amplification of signal for easy installation.
  • Accessory pack including configuration software, remote, IR receiver
  • Compact size for flexible integration location

*Recommended transmission conditions denote cable run within specified distance range of product, no electrical interference, the use of straight cable runs with no bends or kinks and no patch panels or wall outlets used.  Please be advised that the presence of any of these factors in your installation may compromise bandwidth and signal strength. 

For longer transmission distances, LAN control and Ethernet pass-through, please see our full range of HDBaseT matrices, transmitters, receivers and extender sets.

In the Box

EX-1UTP-IR-70-AMP HDBaseT comprising of:

  • 1 x EX-1UTP-IR-70 HDBaseT transmitter
  • 1 x AMP-001-010 HDBaseT Class D Digital Audio Amplifier/receiver
  • 2 x pairs of mounting brackets (recommended)
  • 1 x 5VDC power supply (Transmitter)
  • 1 x USB to 5V power adapter (Transmitter)
  • 1 x 18vDC power supply (AMP-001-010)
  • 1 x remote control handset (AMP-001-010)
  • 2 x IR TX emitter for attachment to input device & display (transmits IR control commands)
  • 2 x IR RX Receiver for attachment to display & input device (receives IR control commands) -  IR frequency range:  940nm IR Frequency: 38KHZ 
  • 1 x Printed product manual & quickstart installation guide (also downloadable from this product main page

Specifications

Transmitter: 76mm/2.99" x 27mm/1.06" x 105mm/4.14" // AMP: 202mm/8.0" x 31mm/1.2" x 178mm/7.0"
Transmitter: 0.35kg / 0.77lb // AMP: 0.68kg / 1.51lb
-5 to +35°C (-41 to +95 °F)
5 to 90 % RH (no condensation)
6.75Gbps
0.5-1.0 volts p-p
5 volts p-p (TTL)
1080p 36bit Deep Colour
1080p transmissions up to 70m / 230ft using Cat5e/6 (Under perfect transmission conditions including straight cable runs with no electrical interference, bends, kinks, patch panels or wall outlets.)

VESA: 640x480, 800x600, 1024x768, 1280x1024, 1600x1200, 1920x1200 DTV/HDTV: 480i/576i/480p/576p/720p/1080i/1080p

Video: HDMI 1.4+HDCP - sink device mirrors the source Full 3D compatibility with frame packing/frame sequential (Blu-ray) and Stereoscopic (satellite/cable broadcasts), ARC supported

DTS-HD Master Audio, Dolby True HD - 2.1 PCM / 4, 6, 8 ohm speaker impedance
Transmitter: 5vDC // AMP: 18vDC
Transmitter: 2.5 Watts // AMP: 45w
Transmitter: N/A // AMP: 153.54
N/A

Video

See video