IR Link Cable for Control System Integration
SKU: CAB-IR-LINKThe WyreStorm CAB-IR-LINK integration cable provides integrators with a simple 2-way IR integration between WyreStorm products and any mainstream control system.
Simply plug the CAB-IR-LINK cable from the IR emitter output of any control system to the IR RX port of a WyreStorm matrix or extender set to achieve seamless control system compatibility and integration.

CONTROL SYSTEM BRIDGE
Literally “bridging” the gap between the control system and the distribution system, the CAB-IR-LINK is an essential part of any installers arsenal. Gone are the days of stripping back pre-moulded TRS cables to carry IR control signals.

CONTROL SYSTEM BRIDGE
Literally “bridging” the gap between the control system and the distribution system, the CAB-IR-LINK is an essential part of any installers arsenal. Gone are the days of stripping back pre-moulded TRS cables to carry IR control signals.
LONG CABLE IDEAL FOR RACK INSTALLS
At 2m/74”, the CAB-IR-LINK is long enough to meet the requirements of the neatest of rack installers, enabling it to be laced neatly between the control system and the distribution system.


LONG CABLE IDEAL FOR RACK INSTALLS
At 2m/74”, the CAB-IR-LINK is long enough to meet the requirements of the neatest of rack installers, enabling it to be laced neatly between the control system and the distribution system.

AUTO-SENSING COUPLER
Not just another dumb jack cable, the CAB-IR-LINK has a built-in circuit that will auto-sense incoming voltage & polarity and convert it to a signal suitable for connection to WyreStorm matrix or NetworkHD system.

AUTO-SENSING COUPLER
Not just another dumb jack cable, the CAB-IR-LINK has a built-in circuit that will auto-sense incoming voltage & polarity and convert it to a signal suitable for connection to WyreStorm matrix or NetworkHD system.
3-POLE – 2-POLE CONVERSION
The CAB-IR-LINK has been designed with ease of use and the installer in mind. A 2-pole (mono) TRS jack is fitted to the end designed to connect to the IR emitter output of a control system and the 3-pole (stereo) end is designed to connect to the IR-RX input on a WyreStorm matrix or NetworkHD encoder.


3-POLE – 2-POLE CONVERSION
The CAB-IR-LINK has been designed with ease of use and the installer in mind. A 2-pole (mono) TRS jack is fitted to the end designed to connect to the IR emitter output of a control system and the 3-pole (stereo) end is designed to connect to the IR-RX input on a WyreStorm matrix or NetworkHD encoder.
Technical Specifications
Additional Features
COMMUNICATION AND CONTROL
IR
1x IR In: 3.5mm (1/8in) TRS Stereo
1x IR Out: 3.5mm (1/8in) TS Mono
ENVIRONMENTAL
Operating Temperature
32°F ~ 113°F (0°C ~ 45°C) | 10% ~ 90%, non-condensing
Storage Temperature
-4°F to ~ 158°F (-20°C ~ +70°C) | 10% ~ 90%, non-condensing
Maximum BTU
NA
DIMENSIONS & WEIGHT
Cable Length
2.0m/6.4ft
Weight
0.48kg/1.05lbs
- Compatible with most leading control systems, including: Control4, Crestron, AMX, Niles, RTI and Bitwise
- 1.2m (length) mono-stereo IR integration cable*
- Auto-sensing polarity
- Automatically adjusts for 5v or 12v control bus
- Tip-VCC 5V, Ring-Signal, Sleeve-Ground
Technical Specifications
COMMUNICATION AND CONTROL
IR
1x IR In: 3.5mm (1/8in) TRS Stereo
1x IR Out: 3.5mm (1/8in) TS Mono
ENVIRONMENTAL
Operating Temperature
32°F ~ 113°F (0°C ~ 45°C) | 10% ~ 90%, non-condensing
Storage Temperature
-4°F to ~ 158°F (-20°C ~ +70°C) | 10% ~ 90%, non-condensing
Maximum BTU
NA
DIMENSIONS & WEIGHT
Cable Length
2.0m/6.4ft
Weight
0.48kg/1.05lbs
Additional Features
- Compatible with most leading control systems, including: Control4, Crestron, AMX, Niles, RTI and Bitwise
- 1.2m (length) mono-stereo IR integration cable*
- Auto-sensing polarity
- Automatically adjusts for 5v or 12v control bus
- Tip-VCC 5V, Ring-Signal, Sleeve-Ground
In the Box
- 1x CAB-IR-LINK Cable