Navigate by Brand
Locate Product by Category or Brand
4K60 In-Line HDMI Scaler with Audio Breakout
SKU: CON-H2-SCL
An essential tool when mixing 4K & 2K screens on the same distribution system, the CON-H2-SCL enables in-line scaling of HDMI content. An HDMI signal from a source device, DA or matrix is converted so that it can be accepted by the connected display. Via a powerful scaling chip, 4K/60 4:4:4 or 4:2:0 can be down-scaled to as low as 480P; likewise, content can be up-scaled to 4K/60 4:4:4. Set up & configuration is done using a simple PC tool which is part of WyreStorm Management Suite V1.6. The software tool allows management of the scaling function and EDID via a simple interface.
IN-LINE EDID EMULATOR
In a legacy installation scenario where EDID is not being communicated properly, the CON-H2-EDID can be connected in-line after the source device and using either a built-in or uploaded EDID file, can ensure the correct content is requested from the source.
4K SCALING IN ANY DIRECTION
Whether the requirement is to scale to or from the full capacity of HDMI2.0, the CON-H2-SCL allows incoming content to be converted (stripping HDR metadata if necessary) to a format compatible with the connected display or projector.
AUDIO DE-EMBED
Connected source devices or switchers that are sending 2ch PCM can have the audio de-embedded from the CON-H2-SCL via the Toslink port for connection to an external audio system.
HDMI2.0 MAXED OUT
Sporting an 18Gbps HDMI input, the CON-H2-SCL can support all UHD video signals up to and including 2160p 4:4:4/60, and high frame-rate HDR 12bit 4:2:2 up to 60Hz.
Technical Specifications
AUDIO & VIDEO
Inputs
1x HDMI In: 19-pin HDMI Type A
Outputs
1x HDMI Out: 19-pin HDMI Type A
1x S/PDIF Out: TOSLINK (Digital Optical)
Audio Formats
HDMI Pass-through: 2ch PCM
S/PDIF Out: De-Embed: 2ch PCM
Video Resolution (Max)
1920x1080p @60Hz 12bit
3840x2160p @60Hz 12bit 4:2:2 HDR
4096x2160p @60Hz 8bit 4:4:4
Supported Standards
DCI | RGB | HDR | HDR10 | Dolby Vision | HLG | BT.2020 | BT.2100
Maximum Pixel Clock
600MHz
COMMUNICATION & CONTROL
HDMI
HDMI 2.0 | HDCP 2.2 | EDID
Inputs supports DVI/D and DisplayPort Dual-Mode (DP++) v1.3 with adapter (not included)
RS-232
1x RS-232: 3-pin Terminal Block – 3.5mm
USB
1x USB: USB-A | Firmware Updates Only
POWER
Power Supply
12V DC 2A
Max Power Consumption
8.38W
Additional Features
- Scales any incoming HDMI content to as low as 800×600 or up to 4096×2160
- Compatible with incoming 18Gbps HDMI content up to 2160p 4:4:4/60
- Converts HDR content and removes metadata for compatibility with all displays
- Converts HDCP encryption to match that of a connected display or projector
- Optical audio output for de-embedded source audio (2ch PCM)
- Setup & configuration via simple PC configuration tool (WyreStorm Management Suite v1.6 or higher)
- Powered by 12v DC power supply (US, UK, EU and AU PSU pins included)
- Mounting brackets included
- USB-3-pin phoenix cable required for setup (not included) – use p/n CAB-USB-PX1
- Full scaling list: Auto set (based on EDID from display) 4096×2160/60, 4096×2160/30, 4096×2160/25, 4096×2160/24, 3840×2160/60, 3840×2160/50, 3840×2160/30, 3840×2160/25, 3840×2160/24, 1920×1200/60, 1920×1080/60, 1920×1080/50, 1280×720/60, 1280×720/50, 1680×1050/60, 1600×1200/60, 1600×900/60, 1440×900/60, 1366×768/60, 1360×768/60, 1280×1024/60, 1280×960/60, 1280×800/60, 1280×768/60, 1024×768/60, 800×600/60
In the Box
- 1x CON-H2-SCL
- 1x DC 12V 2A Power Supply (US/UK/EU/AU)
- 3x 3-Pin Terminal Block
- 2x Mounting Brackets
- 1x Quickstart Guide
Related Products
Now Available
$285.00
MODEL: EXP-SP-0102-8K
Out of stock