100m 4K60 AVX Extender with eARC
SKU: EX-100-H2-EARCExtend 18Gbps A/V signals up to 100 meters with the EX-100-H2-EARC. This extender uses AVX technology, a similar transmission that is found inside our powerful NetworkHD 600 series, to send 4K HDR and Dolby Vision content at 60Hz. Compatible with eARC, you can transmit audio signals such as Dolby TrueHD/Atmos and DTS-HD MA 7.1 signals from a smart TV back to an eARC enabled AVR or soundbar. Flexible control passthrough options including IR, RS-232 and LAN allow you control a display and get devices connected over long distances.

4K HDR & DOLBY VISION
Sporting an 18Gbps HDMI input, the EX-100-H2-EARC can support all UHD video signals up to and including 2160p 4:4:4/60, and high framerate HDR 12bit 4:2:2 up to 60Hz.

4K HDR & DOLBY VISION
Sporting an 18Gbps HDMI input, the EX-100-H2-EARC can support all UHD video signals up to and including 2160p 4:4:4/60, and high framerate HDR 12bit 4:2:2 up to 60Hz.
EARC
Equipped with eARC capability, send high-bitrate audio formats such as Dolby Atmos or DTS:X from an eARC display back to an AVR or soundbar through native HDMI. Let’s not forget backwards compatibility with standard ARC as well.


EARC
Equipped with eARC capability, send high-bitrate audio formats such as Dolby Atmos or DTS:X from an eARC display back to an AVR or soundbar through native HDMI. Let’s not forget backwards compatibility with standard ARC as well.

FLEXIBLE CONTROL
Passthrough signals such as IR and RS-232 from a control system to control your display or other AV equipment. The ethernet passthrough supports full 1Gbps speeds for extending internet or LAN connections.

FLEXIBLE CONTROL
Passthrough signals such as IR and RS-232 from a control system to control your display or other AV equipment. The ethernet passthrough supports full 1Gbps speeds for extending internet or LAN connections.
POWER OVER ETHERNET
Simply power the transmitter side of the extender and the receiver will power over the category cable. Reducing points of failure and making installation easier.


POWER OVER ETHERNET
Simply power the transmitter side of the extender and the receiver will power over the category cable. Reducing points of failure and making installation easier.
Technical Specifications
AUDIO & VIDEO
Inputs
TRANSMITTER
1x HDMI: 19-pin type A
RECEIVER
1x AVX: 8-pin RJ-45 Female
1x S/PDIF: Toslink Audio
Outputs
1x AVX: 8-pin RJ-45 Female
1x S/PDIF: Toslink Audio
1x HDMI: 19-pin type A
Output Video Encoding
AVX
Encoding Data Rate
10.2Gbps
End to End Latency
10μs (microseconds)
Audio Formats
HDMI Passthrough: 2ch Analog/PCM | Multichannel: LPCM up to DTS-X and Dolby Atmos
eARC: 2ch Analog/PCM | Multichannel: LPCM up to DTS-X and Dolby Atmos
S/PDIF: 2ch Analog/PCM | Multichannel: LPCM up to Dolby Digital 5.1
Video Resolutions (max)
1920x1080p @120Hz 12bit
3840x2160p @60H 8bit 4:4:4
3840x2160p @60Hz 12bit 4:2:2 HDR
Supported Standards
DCI | RGB | HDR | HDR10 | Low Latency Dolby Vision up to 60Hz | HLG | BT.2020 | BT.2100
Maximum Pixel Clock
600MHz
COMMUNICATION & CONTROL
HDMI
HDMI | HDCP 2.2 | EDID | CEC Pass-through | DVI/D supported with adapter (not included)
AVX
HDMI | HDCP 2.2 | EDID | Audio | 1-way PoC (TX powers RX) | Bidirectional IR/RS-232/Ethernet | CEC
Ethernet
1x Ethernet: 8-pin RJ-45 Female | Bidirectional over AVX (Transmitter and Receiver)
IR
1x IR RX: 3.5mm (1/8in) TRS Stereo | 1x IR TX: 3.5mm (1/8in) TS Mono (Transmitter and Receiver)
RS-232
1x RS-232: 3-pin Phoenix (Transmitter and Receiver)
POWER
Power Supply
12V DC 3A
Max Power Consumption
24W
Additional Features
- Supports the latest UHD resolutions including HDR10, HLG and Dolby Vision formats
- Extend 18Gbps content up to 100 meters using Cat6a cabling or higher
- Compatible with eARC displays for transmitting high-bitrate audio formats including Dolby Atmos and DTS:X
- Backwards compatible with standard ARC
- Uses powerful AVX transmission technology
- Supports full CEC passthrough via TV remote to control connected AV equipment such as AVR volume or menu navigation
- PoE allows the transmitter to power the receiver over category cable
- 3 audio modes configured by dipswitches: eARC, S/PDIF passthrough, HDMI input de-embed
- Control signal passthrough via bidirectional IR, 2-way RS-232 and Gigabit LAN
Technical Specifications
AUDIO & VIDEO
Inputs
TRANSMITTER
1x HDMI: 19-pin type A
RECEIVER
1x AVX: 8-pin RJ-45 Female
1x S/PDIF: Toslink Audio
Outputs
1x AVX: 8-pin RJ-45 Female
1x S/PDIF: Toslink Audio
1x HDMI: 19-pin type A
Output Video Encoding
AVX
Encoding Data Rate
10.2Gbps
End to End Latency
10μs (microseconds)
Audio Formats
HDMI Passthrough: 2ch Analog/PCM | Multichannel: LPCM up to DTS-X and Dolby Atmos
eARC: 2ch Analog/PCM | Multichannel: LPCM up to DTS-X and Dolby Atmos
S/PDIF: 2ch Analog/PCM | Multichannel: LPCM up to Dolby Digital 5.1
Video Resolutions (max)
1920x1080p @120Hz 12bit
3840x2160p @60H 8bit 4:4:4
3840x2160p @60Hz 12bit 4:2:2 HDR
Supported Standards
DCI | RGB | HDR | HDR10 | Low Latency Dolby Vision up to 60Hz | HLG | BT.2020 | BT.2100
Maximum Pixel Clock
600MHz
COMMUNICATION & CONTROL
HDMI
HDMI | HDCP 2.2 | EDID | CEC Pass-through | DVI/D supported with adapter (not included)
AVX
HDMI | HDCP 2.2 | EDID | Audio | 1-way PoC (TX powers RX) | Bidirectional IR/RS-232/Ethernet | CEC
Ethernet
1x Ethernet: 8-pin RJ-45 Female | Bidirectional over AVX (Transmitter and Receiver)
IR
1x IR RX: 3.5mm (1/8in) TRS Stereo | 1x IR TX: 3.5mm (1/8in) TS Mono (Transmitter and Receiver)
RS-232
1x RS-232: 3-pin Phoenix (Transmitter and Receiver)
POWER
Power Supply
12V DC 3A
Max Power Consumption
24W
Additional Features
- Supports the latest UHD resolutions including HDR10, HLG and Dolby Vision formats
- Extend 18Gbps content up to 100 meters using Cat6a cabling or higher
- Compatible with eARC displays for transmitting high-bitrate audio formats including Dolby Atmos and DTS:X
- Backwards compatible with standard ARC
- Uses powerful AVX transmission technology
- Supports full CEC passthrough via TV remote to control connected AV equipment such as AVR volume or menu navigation
- PoE allows the transmitter to power the receiver over category cable
- 3 audio modes configured by dipswitches: eARC, S/PDIF passthrough, HDMI input de-embed
- Control signal passthrough via bidirectional IR, 2-way RS-232 and Gigabit LAN
In the Box
- 1x EX-100-H2-EARC Transmitter
- 1x EX-100-H2-EARC Receiver
- 1x 12V DC 3A Power Supply (US/UK/EU/AU)
- 1x IR Receiver
- 1x IR Emitter
- 4x Mounting Brackets with screws
- 2x 3-pin Terminal Blocks
- 1x QuickStart Guide