Navigate by Brand
Locate Product by Category or Brand
6U/12 Slot Rack Mount for NetworkHD™ 100/250/400/500/600 Series
SKU: NHD-000-RACK4
The NHD-000-RACK4 is a 6U rack mount that provides a clean installation for up to 12 NetworkHD 100 Series, 250 Decoder, 400, 500 and 600 Series encoders or decoders. The NHD-000-CTL NetworkHD controller is also compatible allowing for all required devices to be installed in a single location.
The slimline and thermally optimized design helps keep your centralized NetworkHD solution perfectly organized.
IDEAL HEAT DISSIPATION
Vertical slot installation supports any combination of up to 12 NetworkHD Series components or NHD-000-CTLs providing ideal component heat dissipation and airflow – a key factor in increasing reliability and product lifespan.
WE SHIP COMPLETE
All mounting hardware provided: rack, brackets, blanking plates, rails, lacing bar, handles and screws.
ALL STEEL DESIGN
Strong, steel enclosure construction keeps hardware secure and protected with units secured via brackets, rails and front panel screws.
STREAMLINE YOUR INSTALL
Specifically designed for organizing NetworkHD components within the main rack location, the NHD-000-RACK4 de-clutters the rack, improving cable management, port identification and unit access.
Technical Specifications
DIMENSIONS & WEIGHT
Rack Units | Wall Box
6U
Height With | Without Feet
265.9mm/10.47in | 265.9mm/10.47in
Width With | Without Brackets
483mm/19.02in | 440mm/17.33in
Depth With | Without Handles
188.3mm/7.42in | 150mm/5.91in
Weight (Chassis without Plates)
2.3kg/5.06lbs
Additional Features
- The NHD-000-RACK4 does not come with encoder/decoder/controller device mounting brackets. These are required to mount encoders/decoders/controller into the NHD-000-RACK4. Device mounting brackets are included with the device, in the box.
- The NHD-000-RACK4 includes 7 blanking plates. Additional NHD-000-RACK4 blanking plates are also available separately: (NHD-RACK4-BLK)
- 6U height and shallow depth allows for high component density in an AV or IT equipment rack
- 12 slots suitable for mounting a combination of 100 Series, 250 Decoder, 400 Series, 500 Series, 600 Series & NetworkHD Controller devices
- NetworkHD encoders or decoders can be mounted with connections front or rear facing to suit alternative cable management designs
- The included removable rear cable management lacing bar helps route cabling at the correct point to optimize thermal efficiency
- The included removable front-facing handles greatly improves maneuverability and convenience
- Provides optimal thermal dissipation in a passively or actively cooled rack design to maintain premium device performance and MTBF
- Enables systems to be pre-built into the rack kit prior to arriving on site to improve speed and efficiency of installation
- Sturdy all-steel design creates a solid structure for supporting NetworkHD components
- Includes 7x blanking plates
* excludes NHD-400-TX-IW
In the Box
- 1x NHD-000-RACK4 Chassis
- 2x 19” Rack Mounting Brackets
- 7x Blank Plates
- 1x Assembly Screws Pack
