1080p HD Low Bandwidth H.264/H.265 AV over IP Decoder with Sealoc Protection
SKU: NHD-110-RX-SThe NHD-110-RX-S is an AV decoder to the powerful 110 series of NetworkHD components. This “S” model has been treated with Sealoc’s Weatherloc technology to resist the elements such as water, moisture, humidity, dust, salt-fog, salt-air, acidic products and more. The 110 series components support either H.264 or H.265 video encoding/decoding of up to 1080p60Hz content. The NHD-110-RX can natively process up to a 16×16 video wall to create captivating digital landscapes. The 110 series components are also compatible with the NHD-250-RX multiview receiver allowing up to 9 unique streams to be sent to a single display.
High-Efficiency H.265 encoder, commonly known as MPEG-H Part 2, is a video compression standard developed as part of the MPEG-H project to replace the widely used Advanced Video Coding.
Tailored for Outdoor Environments
A pioneering collaboration with Sealoc and their proprietary Weatherloc technology, WyreStorm weatherproofed AV over IP receivers protect the endpoints of your AV solutions from the demanding outdoor environments. From coastal climates to dust particles and everything in between, the NetworkHD Sealoc receiver provides the perfect AV solution for customer engaging patio displays, video walls for live events, or even outdoor digital signage without any need for bulky weather proof boxes that prevent ventilation.

Best of Show ’22 Award Winner
Our award-winning NetworkHD line keeps on winning! Our NHD-110-RX-S has scooped up Best in Show at InfoComm 2022 from both Sound & Video Contractor and rAVe [PUBS]!

Best of Show ’22 Award Winner
Our award-winning NetworkHD line keeps on winning! Our NHD-110-RX-S has scooped up Best in Show at InfoComm 2022 from both Sound & Video Contractor and rAVe [PUBS]!
SEALOC PROTECTION
Treated with Sealoc’s nano-coating formula to resist the elements such as water, moisture, humidity, dust, salt-fog, salt-air, acidic products and more. This receiver is perfect for outdoor applications such as patio displays, digital signage, live events and any coastal areas with high humidity or salt.


SEALOC PROTECTION
Treated with Sealoc’s nano-coating formula to resist the elements such as water, moisture, humidity, dust, salt-fog, salt-air, acidic products and more. This receiver is perfect for outdoor applications such as patio displays, digital signage, live events and any coastal areas with high humidity or salt.

SECURITY DONE RIGHT
Security is paramount when it comes to AV solutions, especially in markets where sensitive information is being transmitted and a malicious attack is detrimental to your business. Our NHD-110-RX-S uses security protocols such as SSH, HTTPS and AES to encrypt data and prevent unauthorized access.

SECURITY DONE RIGHT
Security is paramount when it comes to AV solutions, especially in markets where sensitive information is being transmitted and a malicious attack is detrimental to your business. Our NHD-110-RX-S uses security protocols such as SSH, HTTPS and AES to encrypt data and prevent unauthorized access.
RESOLUTION SCALING
Each NHD-110-RX-S features a powerful video scaler. These scalers can operate automatically or be forced to transmit a specific video timing and format. Having scalers ensure you will always have a video signal no matter the display you connect to. Not to mention, the amazing seamless video switching capability.


RESOLUTION SCALING
Each NHD-110-RX-S features a powerful video scaler. These scalers can operate automatically or be forced to transmit a specific video timing and format. Having scalers ensure you will always have a video signal no matter the display you connect to. Not to mention, the amazing seamless video switching capability.

VIDEO WALLS
Capable of processing up to a 16×16 video wall. Easily design video walls using the intuitive NetworkHD console software that’s part of the WyreStorm Management Suite. Easily create breathtaking digital landscapes.

VIDEO WALLS
Capable of processing up to a 16×16 video wall. Easily design video walls using the intuitive NetworkHD console software that’s part of the WyreStorm Management Suite. Easily create breathtaking digital landscapes.
Technical Specifications
Additional Features
AUDIO & VIDEO
Inputs
1x 8-pin RJ-45 female | 10/100Base-T
Outputs
1 x HDMI 19-pin HDMI type A
1x 3-pin Phoenix Analog Audio
(Both HDMI and Analog outputs allow discrete audio routing from any available NHD-110-TX on the same network.)
Audio Formats
LPCM/MPEG4 AAC stereo, 48KHz
Video Encoding
Primary Stream – H.264/H.265, configurable up to 30Mbps
Video Resolutions (Max)
HDMI: 1920x1080p @60Hz 8bit (15m/50ft)
Cat5e or higher: 1920x1080p @60Hz 8bit (100m/328ft)
End to End Latency
High Quality Mode: ~250msLow Latency Mode: ~80ms
Maximum Pixel Clock
165MHz
COMMUNICATION & CONTROL
HDMI
HDCP 1.4 | EDID | CEC (configurable)
RS-232
1x 3-Pin Phoenix – API controlled from NHD-000-CTL
LAN
1x 8-pin RJ-45 female | 10/100Base-T | PoE 802.1af
IR
1x IR TX: 3.5mm TS Jack Socket
1x IR RX: 3.5mm TS Jack Socket
(IR signals can be bidirectional passthrough or via API commands from NHD-000-CTL for routable IR to discrete TX/RX devices.)
POWER
Power Supply
PoE | 12V 1A DC
Max Power Consumption
6W (DC Adapter)
- Supports up to 1080p@60Hz video content
- Low bandwidth or high-quality transmission methods. Low latency ~ 80ms. High-quality ~250ms
- Interoperable with NHD-100-TX and NHD-140-TX
- Analog audio de-embed for easy connection to external audio DSP or amplifier
- Image scaling – use mixed resolution displays throughout an installation
- Seamless video switching – no black screens or freeze frames
- Hugely scalable I/O, utilizing multicast technology
- Zero-configuration switch setup using unicast technology
- Flexible IP address settings: AutoIP/Static/DHCP
- Customizable CEC, IR or RS-232 control of connected devicesCustom “No Source” idle image upload for branded down time
- Breakaway, independent routing of all video, audio, IR, USB and RS-232 streams
- Infrared signal generation via API – supports Hex Global Cache format
- Compatible with NHD-000-RACK4 rack mounting kit (brackets included with decoder)
The NHD-110-RX-S is IP64 rated and should not be submerged under water for any period of time. Specific installation orientation required for proper protection.
Technical Specifications
AUDIO & VIDEO
Inputs
1x 8-pin RJ-45 female | 10/100Base-T
Outputs
1 x HDMI 19-pin HDMI type A
1x 3-pin Phoenix Analog Audio
(Both HDMI and Analog outputs allow discrete audio routing from any available NHD-110-TX on the same network.)
Audio Formats
LPCM/MPEG4 AAC stereo, 48KHz
Video Encoding
Primary Stream – H.264/H.265, configurable up to 30Mbps
Video Resolutions (Max)
HDMI: 1920x1080p @60Hz 8bit (15m/50ft)
Cat5e or higher: 1920x1080p @60Hz 8bit (100m/328ft)
End to End Latency
High Quality Mode: ~250msLow Latency Mode: ~80ms
Maximum Pixel Clock
165MHz
COMMUNICATION & CONTROL
HDMI
HDCP 1.4 | EDID | CEC (configurable)
RS-232
1x 3-Pin Phoenix – API controlled from NHD-000-CTL
LAN
1x 8-pin RJ-45 female | 10/100Base-T | PoE 802.1af
IR
1x IR TX: 3.5mm TS Jack Socket
1x IR RX: 3.5mm TS Jack Socket
(IR signals can be bidirectional passthrough or via API commands from NHD-000-CTL for routable IR to discrete TX/RX devices.)
POWER
Power Supply
PoE | 12V 1A DC
Max Power Consumption
6W (DC Adapter)
Additional Features
- Supports up to 1080p@60Hz video content
- Low bandwidth or high-quality transmission methods. Low latency ~ 80ms. High-quality ~250ms
- Interoperable with NHD-100-TX and NHD-140-TX
- Analog audio de-embed for easy connection to external audio DSP or amplifier
- Image scaling – use mixed resolution displays throughout an installation
- Seamless video switching – no black screens or freeze frames
- Hugely scalable I/O, utilizing multicast technology
- Zero-configuration switch setup using unicast technology
- Flexible IP address settings: AutoIP/Static/DHCP
- Customizable CEC, IR or RS-232 control of connected devicesCustom “No Source” idle image upload for branded down time
- Breakaway, independent routing of all video, audio, IR, USB and RS-232 streams
- Infrared signal generation via API – supports Hex Global Cache format
- Compatible with NHD-000-RACK4 rack mounting kit (brackets included with decoder)
The NHD-110-RX-S is IP64 rated and should not be submerged under water for any period of time. Specific installation orientation required for proper protection.
In the Box
- 1x NHD-110-RX-S Decoder
- 1x IR Emitter
- 1x IR Receiver
- 2x 3-pin Terminal Block
- 2x Wall Mounting Brackets
- 2x Rack Mounting Brackets
Related Products