1080p HD Low Bandwidth H.264/H.265 AV over IP Decoder
SKU: NHD-110-RX
The NHD-110-RX is the AV decoder to the powerful 110 series of NetworkHD AV over IP components. The 110 series components provide H.264 or H.265 video encoding/decoding of up to 1080p60Hz content over a network. The NHD-110-RX can natively process up to a 16×16 video wall to create captivating digital landscapes and also includes a powerful video scaler to provide instant matrix switching. The 110 series components are also compatible with the NHD-250-RX multiview receiver allowing up to 9 unique streams to be sent to a single display.
VIDEO WALL
Capable of processing up to a 16×16 video wall. Easily design video walls using the intuitive NetworkHD console software that’s part of the WyreStorm Management Suite. Easily create breathtaking digital landscapes.
FLEXIBLE CONTROL
Choose your flavor, the NHD-110-RX can control displays or other peripheral equipment via IR, RS232, or CEC. No matter the device you have, NetworkHD has a method to control it. All control signals are fully routable and customizable through the entire system.
VIDEO SCALING
Each NHD-110-RX features a powerful video scaler. These scalers can operate automatically or be forced to transmit a specific video timing and format. Having scalers ensure you will always have a video signal no matter the display you connect to. Not to mention, the amazing seamless video switching capability.
DISCRETE ROUTING
Every signal that passes through a NetworkHD 110 system can be discretely routed. This includes video, audio, IR, RS232, USB, and CEC. NetworkHD provides the most flexibility possible and can be perfectly tailored to your application requirements.
- Uses security protocols such as SSH, HTTPS and AES to encrypt data and prevent unauthorized access
- Supports up to 1080p @ 60Hz video content
- Support all SD and HD formats – including interlaced content
- Low bandwidth or high-quality transmission methods. Low latency ~ 80ms. High-quality ~250ms
- Interoperable with NHD-100-TX and NHD-140-TX
- Analog audio de-embed for easy connection to external audio DSP or amplifier
- Image scaling – use mixed resolution displays throughout an installation
- Seamless video switching – no black screens or freeze frames
- Hugely scalable I/O, utilizing multicast technology
- Zero-configuration switch setup using unicast technology
- Flexible IP address settings: AutoIP/Static/DHCP
- Customizable CEC, IR or RS-232 control of connected devices
- Up to 16×16 video walls with image scaling, bezel compensation and rotation
- Custom “No Source” idle image upload for branded down time
- Breakaway, independent routing of all video, audio, IR, USB and RS-232 streams
- Infrared signal generation via API – supports Hex Global Cache format
- Batch firmware update and batch settings functions offers a massive reduction on installation times
- HDCP 1.4 compliant
- IEEE 802.3af PoE compliant PD
- Compatible with NHD-000-RACK4 rack mounting kit (brackets included with decoder)
Audio and Video
| Inputs | 1x 8-pin RJ-45 female | 10/100Base-T |
| Outputs | 1 x HDMI 19-pin HDMI type A
1 x 3-pin Phoenix Analog Audio Both HDMI and Analog outputs allow discrete audio routing from any available NHD-110-TX on the same network. |
| Audio Formats | LPCM/MPEG4 AAC stereo, 48KHz |
| Video Encoding | Primary Stream – H.264/H.265, configurable up to 30Mbps |
| Video Resolutions (Max) | HDMI: 1920x1080p @60Hz 8bit (15m/50ft)Cat5e or higher: 1920x1080p @60Hz 8bit (100m/328ft) |
| End to End Latency | High Quality Mode: ~250msLow Latency Mode: ~80ms |
| Maximum Pixel Clock | 165MHz |
Communication and Control
| HDMI | HDCP 1.4 | EDID | CEC (configurable) |
| RS-232 | 1 x 3-Pin Phoenix – API controlled from NHD-000-CTL |
| LAN | 1x 8-pin RJ-45 female | 10/100Base-T | PoE 802.1af |
| IR | 1x IR TX: 3.5mm TS Jack Socket
1x IR RX: 3.5mm TS Jack SocketIR signals can be bi-directional passthrough or via API commands from NHD-000-CTL for routable IR to discrete TX/RX devices |
| USB | 2 x Type ADevice PortsUSB v1.1 for KVM applications – bandwidth is 115200bps (routable) |
Power
| Power Supply | PoE | 12V 1A DC |
| Max Power Consumption | 6W (DC adapter) |
Environmental
| Operating Temperature | 32°F ~ 113°F (0°C ~ 45°C)10% ~ 90%, non-condensing |
| StorageTemperature | -4°F to ~ 158°F (-20°C ~ +70°C)10% ~ 90%, non-condensing |
| Maximum BTU |
Dimensions & Weight
| Rack Units/Wall Box | |
| Height | 1″ |
| Width | 6.875″ |
| Depth | 3.875″ |
| Weight | 1.1lbs |
Regulatory
| Safety and Emission | CE | FCC | RoHS | RCM | EAC |
NHD-110-TX
1080p HD Low Bandwidth H.264/H.265 AV over IP Encoder
NHD-000-CTL
Controller for All NetworkHD Series Products
NHD-140-TX
NetworkHD™ 100 Series AV over IP H.264 Quad Encoder