Navigate by Brand
Locate Product by Category or Brand
1080p HD Low Bandwidth H.264/H.265 AV over IP Decoder
SKU: NHD-110-RX
The NHD-110-RX is the AV decoder to the powerful 110 series of NetworkHD AV over IP components. The 110 series components provide H.264 or H.265 video encoding/decoding of up to 1080p60Hz content over a network. The NHD-110-RX can natively process up to a 16×16 video wall to create captivating digital landscapes and also includes a powerful video scaler to provide instant matrix switching. The 110 series components are also compatible with the NHD-250-RX multiview receiver allowing up to 9 unique streams to be sent to a single display.
VIDEO WALL
Capable of processing up to a 16×16 video wall. Easily design video walls using the intuitive NetworkHD console software that’s part of the WyreStorm Management Suite. Easily create breathtaking digital landscapes.
FLEXIBLE CONTROL
Choose your flavor, the NHD-110-RX can control displays or other peripheral equipment via IR, RS-232, or CEC. No matter the device you have, NetworkHD has a method to control it. All control signals are fully routable and customizable through the entire system.
VIDEO SCALING
Each NHD-110-RX features a powerful video scaler. These scalers can operate automatically or be forced to transmit a specific video timing and format. Having scalers ensure you will always have a video signal no matter the display you connect to. Not to mention, the amazing seamless video switching capability.
DISCRETE ROUTING
Every signal that passes through a NetworkHD 110 system can be discretely routed. This includes video, audio, IR, RS-232, USB, and CEC. NetworkHD provides the most flexibility possible and can be perfectly tailored to your application requirements.
Technical Specifications
AUDIO & VIDEO
Inputs
TX:
1x HDMI 19-pin HDMI type A
RX:
1x 8-pin RJ-45 female | 10/100Base-T
Outputs
TX:
1x 3-pin Phoenix Analog Audio (de-embed from HDMI input)
RX:
1 x HDMI 19-pin HDMI type A
1 x 3-pin Phoenix Analog Audio
Both HDMI and Analog outputs allow discrete audio routing from any available NHD-110-TX on the same network.
Video Encoding
Primary Stream – H.264/H.265, configurable up to 30Mbps
End to End Latency
High Quality Mode: ~250ms
Low Latency Mode: ~80ms
Audio Formats
LPCM/MPEG4 AAC stereo, 48KHz
Video Resolution (Max)
HDMI: 1920x1080p @60Hz 8bit (15m/50ft)
Cat5e or higher: 1920x1080p @60Hz 8bit (100m/328ft)
Maximum Pixel Clock
150Mhz
AUDIO & VIDEO
Primary Stream – H.264/H.265, configurable up to 30Mbps
Preview Stream – MJPEG CIF@30Hz, configurable up to 2Mbps
COMMUNICATION & CONTROL
HDMI
HDCP 1.4 | EDID | CEC (configurable)
RS-232
1x 3-Pin Phoenix – API controlled from NHD-000-CTL
LAN
1x 8-pin RJ-45 female | 10/100Base-T | PoE 802.1af
IR
1x IR TX: 3.5mm TS Jack Socket
1x IR RX: 3.5mm TS Jack Socket
IR signals can be bidirectional passthrough or via API commands from NHD-000-CTL
USB
TX:
1 x Type B Host
USB v1.1 for KVM applications – bandwidth is 115200bps (routable)
RX:
2 x Type A Device Ports
USB v1.1 for KVM applications – bandwidth is 115200bps (routable)
POWER
Power Supply
PoE | 12V 1A DC
Max Power Consumption
6W (DC adapter)
Additional Features
- Uses security protocols such as SSH, HTTPS and AES to encrypt data and prevent unauthorized access
- Supports up to 1080p @ 60Hz video content
- Support all SD and HD formats – including interlaced content
- Low bandwidth or high-quality transmission methods. Low latency ~ 80ms. High-quality ~250ms
- Interoperable with NHD-100-TX and NHD-140-TX
- Analog audio de-embed for easy connection to external audio DSP or amplifier
- Image scaling – use mixed resolution displays throughout an installation
- Seamless video switching – no black screens or freeze frames
- Hugely scalable I/O, utilizing multicast technology
- Zero-configuration switch setup using unicast technology
- Flexible IP address settings: AutoIP/Static/DHCP
- Customizable CEC, IR or RS-232 control of connected devices
- Up to 16×16 video walls with image scaling, bezel compensation and rotation
- Custom “No Source” idle image upload for branded down time
- Breakaway, independent routing of all video, audio, IR, USB and RS-232 streams
- Infrared signal generation via API – supports Hex Global Cache format
- Batch firmware update and batch settings functions offers a massive reduction on installation times
- HDCP 1.4 compliant
- IEEE 802.3af PoE compliant PD
- Compatible with NHD-000-RACK4 rack mounting kit (brackets included with decoder)
In the Box
- 1x NHD-110-TX Decoder
- 1x IR Emitter
- 1x IR Receiver
- 2x 3-pin Terminal Blocks
- 2x Wall Mounting Brackets
- 2x Rack Mounting Brackets
Device is PoE powered.
12V 1A PSU sold separately
