Navigate by Brand
Locate Product by Category or Brand
1080p HD Low Bandwidth H.264/H.265 AV over IP Encoder
SKU: NHD-110-TX
The NHD-110-TX is the AV encoder to the powerful 110 series of NetworkHD AV over IP components. The 110 series components provide H.264 or H.265 video encoding/decoding of up to 1080p60Hz content over a network. The NHD-110-TX provides a low bandwidth yet incredibly high quality video stream allowing you to easily accomplish large scale AV deployments. The 110 series components are also compatible with the NHD-250-RX multiview receiver allowing up to 9 unique streams to be sent to a single display.
H.265 Encoding
Choose your flavor, the NHD-110-TX can encode AV signal using either H.264 or H.265. Using H.265 provides incredibly efficient video streams. For comparison, an H.265 5Mbps stream is equal to a 30Mbps H.264 stream.
Unicast & Multicast
The 110 Series can operate in either a Unicast or Multicast mode. Multicast mode is the traditional method and is suggested for larger deployments of 80+ devices. Unicast mode however is great for small system and does not require a Layer 2 switch or support for IGMP Snooping, meaning you can practically use any switch you want.
AES Encryption
Security is key in today’s world. The NetworkHD 110 series support AES 128-bit AV encryption over the network. Data sent from an NHD-110-TX is encapsulated using advanced methods to ensure that sensitive or private data cannot be accessed by 3rd-parties.
USB
USB routing allows for the 110 series to fit into K/M applications. Just like the AV stream, USB can be routed between all RXs and TXs. This allows for a single USB host device to have access to potentially hundreds of individual USB device endpoints.
Technical Specifications
AUDIO & VIDEO
Inputs
TX:
1x HDMI 19-pin HDMI type A
RX:
1x 8-pin RJ-45 female | 10/100Base-T
Outputs
TX:
1x 3-pin Phoenix Analog Audio (de-embed from HDMI input)
RX:
1 x HDMI 19-pin HDMI type A
1 x 3-pin Phoenix Analog Audio
Both HDMI and Analog outputs allow discrete audio routing from any available NHD-110-TX on the same network.
Video Encoding
Primary Stream – H.264/H.265, configurable up to 30Mbps
Preview Stream – MJPEG CIF@30Hz, configurable up to 2Mbps
End to End Latency
High Quality Mode: ~250ms
Low Latency Mode: ~80ms
Audio Formats
LPCM/MPEG4 AAC stereo, 48KHz
Video Resolution (Max)
HDMI: 1920x1080p @60Hz 8bit (15m/50ft)
Cat5e or higher: 1920x1080p @60Hz 8bit (100m/328ft)
Maximum Pixel Clock
150Mhz
AUDIO & VIDEO
Primary Stream – H.264/H.265, configurable up to 30Mbps
Preview Stream – MJPEG CIF@30Hz, configurable up to 2Mbps
COMMUNICATION & CONTROL
HDMI
HDCP 1.4 | EDID
RS-232
1x 3-Pin Phoenix – API controlled from NHD-000-CTL
LAN
1x 8-pin RJ-45 female | 10/100Base-T | PoE 802.1af
IR
1x IR TX: 3.5mm TS Jack Socket
IR signals can be bi-directional passthrough or via API commands from NHD-000-CTL for routable IR to discrete TX/RX devices
USB
TX:
1 x Type B Host
USB v1.1 for KVM applications – bandwidth is 115200bps (routable)
RX:
2 x Type A Device Ports
USB v1.1 for KVM applications – bandwidth is 115200bps (routable)
POWER
Power Supply
PoE | 12V 1A DC
Max Power Consumption
6W (DC adapter)
Additional Features
- Supports up to 1080p @ 60Hz video content
- Support all SD and HD formats – including interlaced content
- Flexible encoding using either H.264 or H.265 encoding. Encoding is configurable between a constant bitrate or variable bitrate.
- Low bandwidth or high-quality transmission methods. Low latency ~ 80ms. High-quality ~250ms
- Compatible with NHD-250-RX Multiview receiver
- Analog audio de-embed for easy connection to external audio DSP or amplifier
- Seamless video switching – no black screens or freeze frames
- Hugely scalable I/O, utilizing multicast technology
- Zero-configuration switch setup using unicast technology
- Live video preview streams for use with NetworkHD Touch or a custom control UI
- Flexible IP address settings: AutoIP/Static/DHCP
- Customizable, IR or RS-232 control of connected devices
- Infrared signal generation via API – supports Hex Global Cache format
- Batch firmware update and batch settings functions offers a massive reduction on installation times
- Custom EDID management with import/export
- HDCP 1.4 compliant
- IEEE 802.3af PoE compliant PD
- Includes optional DC power adapter and mounting brackets
In the Box
- 1x NHD-110-TX Encoder
- 1x IR Emitter
- 1x IR Receiver
- 2x 3-pin Terminal Block
- 2x Wall Mounting Brackets
- 2x Rack Mounting Brackets
Device is PoE powered.
12V 1A PSU sold separately
