NetworkHD™ 200 Series AV over IP H.264 MultiView Processor
SKU: NHD-250-RX
The NHD-250-RX is an enhanced MultiView display decoder compatible with the NetworkHD 100 and 200 Series, an ultra low bandwidth H.264 AV over IP solution for distribution of point-to-point, one-to-many and many-to-many over a managed network.
The NHD-250-RX H.264 decoder is intended for use with 100 or 200 Series H.264 encoders (sold separately) to provide a complete end-to-end video distribution system. When used in conjunction with the NHD-000-CTL system controller complete control integration is simple.
4K OUTPUT
NetworkHD™ multiview decoders are the only NetworkHD 100/200 series product with a 4K output – capable of scaling a single 2K source to full 4K resolution or displaying multiple source images with no or minimal scaling on a 4K display.
MULTIVIEW MONITORING
The NHD-250-RX multiview processor is capable of displaying up to nine simultaneous video feeds on a single 4K display or 6 feeds in overlay mode on a 2K display, with users able to select between hybrid grid or PiP layouts among other configurations.
SERIAL AND HDMI DEVICE CONTROL
In addition to HDMI streaming over an IP Network, the 100/200 Series sends RS-232 control signals to a source or display and CEC control commands to a display device for single control signal deployment without the need for additional equipment.
NETWORKHD TOUCH CONTROL
A revolution in AV control, WyreStorm’s award-winning NetworkHD Touch™ App for iPad puts the entire NetworkHD system at your fingertips. See what you’re switching with live video source and display previews and instant drag and drop content selection.
- MultiView capable of displaying 1 to 9 simultaneous NetworkHD 2K encoder streams on a single 4K display
- Up to 6 simultaneous NetworkHD 2K encoder streams on a single 2K display in overlay mode
- Ideal for commercial monitoring of remote displays within a venue from a central location to quickly verify content transmitted to screens
- Multiple configurable layouts including hybrid grid layouts, PiP, PaP, arbitrary layouts and preset multiscreen arrangements
- Graphic or logo can be inserted into central image placeholder for screen indication or additional branding
- Configurable resolution output scaling, timing and mode
- Instant switching with WyreStorm QuickSync™
- RS-232 with integration with leading 3rd party control systems, including the NetworkHD Touch™ app
- CEC control of connected displays
- Analog audio breakout
- Configurable source audio switching
- Multiple NHD-250-RX units can be combined to suit the monitoring needs of the project
- Dramatically reduces the number of components required to monitor a venue – less decoders and screens – for reduced project complexity and less potential points of failure within installations
- Also provides video wall-like functionality on large screens or multiple screens combined with different layouts for custom display configurations
- Backwards compatible – able to be added to any existing NetworkHD 100/200 Series system
- IEEE 802.3af PoE compliant PD
- Includes DC power adapter and mounting bracket
- Compatible with NHD-000-RACK4 rack mounting kit
Audio and Video
| Inputs | 1x 8-pin RJ-45 (Transmission from TX) |
| Outputs | 1x HDMI Out: 19-pin HDMI Type A1x Audio Out: 3-pin Terminal Block (3.5mm) |
| Audio Formats | 2ch LPCM 48KHz |
| Input Video Decoding | H.264 |
| Decoding Data Rate | Max: 30Mb/s per stream |
| End to End Latency (Max) | ~80ms (low latency mode) | ~300ms (high quality mode) |
| Video Resolutions (Max) |
Note: All resolutions listed are 8bit RGB or 4:4:4 8bit: 3840x2160p @24/30/60Hz (Tile mode only) 1920x1080p @24/25/30/50/60Hz 1280x720p @30/50/60Hz720x576p @50Hz720x480p @60Hz60fps Progressive: 640×480 | 800×600 | 1024×768 | 1280×800 | 1280×1024 | 1360×768 | 1366×768 | 1400×1050 | 1440×900 | 1600×1200 | 1680×1050 | 1920×1200 |
| 3D | NA |
| Maximum Pixel Clock | 594MHz |
Communication and Control
| HDMI | HDCP 1.4 | CEC |
| Ethernet | 1x LAN (PoE): 8-pin RJ-45 ANSI/TIA-568 8P8C, 1000Base-T, PoE PD (IEEE 802.3af) |
| RS-232 | 2x RS-232: 4-pin Terminal Block (3.5mm) | 2 Way |
Power
| Power Supply | 12V DC |
| PoE | IEEE 802.3af | (15.4W at PSE) |
| Max Power Consumption | 8.3W (with PSU) |
Environmental
| Operating Temperature | 32°F ~ 113°F (0°C ~ 45°C)10% ~ 90%, non-condensing |
| StorageTemperature | -4°F to ~ 158°F (-20°C ~ +70°C)10% ~ 90%, non-condensing |
| Maximum BTU | 31 BTU/hr |
Dimensions & Weight
| Rack Units/Wall Box | <1U flat on shelf | 6U in NHD-000-RACK4 |
| Height | 25mm/1in |
| Width | 220mm/8.67in |
| Depth | 130mm/5.12in |
| Weight | 0.78kg/1.72lbs |
Regulatory
| Safety and Emission | CE | FCC | RCM | RoHS |
NHD-140-TX
NetworkHD™ 100 Series AV over IP H.264 Quad Encoder
NHD-000-CTL
Controller for All NetworkHD Series Products
NHD-TOUCH
Touchscreen control application for all NetworkHD Series
NHD-000-RACK4
6U/12 Slot Rack Mount for NetworkHD™ 100/200/400 Series