- Receives 4K UHD HDBaseT transmissions up to 35m/115ft
- Compatible with 4K HDR source content
- Compatible with HDCP 2.2 protected content
- 2-way PoH enabled for convenient PSU-free installation
- RS-232 and IR passthrough for control of peripheral equipment
35m 4K HDBaseT™ ReceiverSKU: RX-35-POH
Compact Class B HDBaseT receiver supporting 4K HDR transmissions up to 35 meters from a compatible HDBaseT matrix or presentation switcher. 2-way PoH allows the RX-35-POH to power over category cable from a PoH matrix or switcher and also allows for the receiver to power in-wall HDBaseT transmitters.
CLASS B HDBASET™
Small in size but not in specification, the RX-35-POH is no different to the modern H2 family of products, supporting pixel-perfect 4K UHD 4:2:0 10-bit @24Hz at distances up to 35m/115ft or 1080p to 35m/115ft.
Supports 3 methods of control pass-through. Being a pure HDBaseT™ device, the RX-35-POH can handle bi-directional IR, RS-232 and even CEC routing when used as part of a compatible WyreStorm matrix or extender system.
The RX-35-POH can be powered by a PoH compatible matrix or presentation switcher meaning one less thing to think about when specifying & installing a WyreStorm system.
FULLY COMPLIANT WITH HDCP 2.2 ENCRYPTION
As with all of our HDBaseT Receivers, remaining relevant & legal is key to their operation. The RX-35-POH is compliant with the strict anti-piracy algorithms that prevent the unauthorized distribution of content, meaning a trouble-free installation.
Audio and Video
|Inputs||1x HDBaseT In 8-pin RJ-45 female|
|Outputs||1x HDMI 19-pin type A|
|Output Video Encoding||HDBaseT Class B|
|Encoding Data Rate||9.2Gbps|
|End to End Latency (Max)||10μs (micro seconds)|
|Audio Formats||2ch PCM | Up to DTS-X and Dolby Atmos|
|Video Resolutions (Max)||Video Resolutions
1920x1080p @60Hz 16bit
3840x2160p @60Hz 10bit 4:2:0 HDR
4096x2160p @60Hz 8bit 4:2:0
Note: WyreStorm recommends the use of shielded category cable to minimize signal noise and interference
|Supported Standards||DCI | RGB | HDR10/10+ | HLG | BT.2020 | BT.2100|
|Maximum Pixel Clock||HDMI: 297Mhz | HDBaseT: 297MHz|
Communication and Control
|HDMI||HDCP 2.2 | EDID | DVI/D supported with adapter (not included)|
|HDBaseT||HDCP 2.2 | EDID | PoH 2-way | Bidirectional IR, RS-232|
|IR||1x IR TX 3.5mm (1/8in) Mono | 1x IR RX 3.5mm (1/8in) Stereo | Bidirectional over HDBaseT™|
|RS-232||1x 3-pin Phoenix Connector | Bidirectional over HDBaseT™|
|Power Supply||12V DC (Optional)|
|Max Power Consumption||7.2W|
|Operating Temperature||32°F ~ 113°F (0°C ~ 45°C), 10% ~ 90%, non-condensing|
|Storage Temperature||-4°F to ~ 158°F (-20°C ~ +70°C), 10% ~ 90%, non-condensing|
|Maximum BTU||24.6 BTU/hr|
Dimensions & Weight
|Rack Units/Wall Box||<1U|
|Safety and Emission||CE | FCC | RoHS | RCM | EAC|