Navigate by Brand
Locate Product by Category or Brand
70m 4K HDBaseT™ Scaling Receiver with Downscaling
SKU: RX-70-4K-SCL
A vital addition to any HDBaseT distribution system, the RX-70-4K-SCL scales incoming video content to best suit the display device to which it is attached. This allows the best quality video content to be sent throughout the system, avoiding EDID clashes or older display technology compromising the rest of the system.
ARC ONBOARD
ARC extraction via HDMI is done via the control API and then sent back to the matrix for connection to an AVR or audio system.
AUDIO DE-EMBED
Optical & coaxial S/PDIF output allows for extraction of source audio from HDBaseT™ signal.
HDMI & OPTICAL OPTIONS
Audio Return selectable between HDMI or S/PDIF optical input which allows for audio from a TV without ARC support to send audio to the transmitter or matrix.
CLASS A HDBASET™
Receives HDMI transmissions of 4K up to 70m/230ft and 1080p up to 100m/328ft with multi-channel audio, control, ethernet and PoH.
- Scales content sent over HDBaseT to match the capability of connected screen or projector
- 4K UHD content @60Hz 4:2:0 scaled to as low as 576P
- Upscales incoming content to 4K 60Hz 4:4:4
- Sends ARC via HDMI along HDBaseT
- Analog and S/PDIF output enables de-embedding of audio to send to local audio system
- Resolves issue with mixing 4K & 2K screens in an installation by down-scaling UHD 4K content to 1080p/720p
- Also up-scales any incoming content to 4K/60 4:4:4 8-Bit
- Receives 4K UHD @60Hz 4:2:0 or HDR @24Hz at 70m/230ft and 1080p content at 100m/328ft
- Scaling, ARC, CEC & Audio Out controllable via HDBaseT/Ethernet link by Telnet
- S/PDIF and Analog audio breakout
- Dual Ethernet ports
- Bidirectional IR and RS-232
- HDCP 2.2 compliant
Audio and Video
| Inputs | 1x HDBaseT In 8-pin RJ-45 female |
| Outputs | 1x HDMI 19-pin type A 1x S/PDIF Out Coaxial Digital (Audio de-embedded from HDBaseT signal) 1x Audio Out 3pin Phoenix Connector (Audio de-embedded from HDBaseT signal) |
| Audio Formats | S/PDIF: 2ch PCM | Multichannel: Up to 5.1 DTS and Dolby Digital HDMI: 2ch PCM | Multichannel: LPCM and Up to DTS-X and Dolby Atmos |
| Output Video Encoding | HDBaseT Class A |
| Encoding Data Rate | 9.2Gbps |
| End to End Latency | 10μs (micro seconds) |
| Video Resolutions (Max) | Video Resolutions 1920x1080p @60Hz 12bit 1920x1080p @60Hz 16bit 3840x2160p @60Hz 10bit 4:2:0 HDR 3840x2160p @30Hz 8bit 4:4:4 3840x2160p @60Hz 10bit 4:2:0 HDR 4096x2160p @60Hz 8bit 4:2:0 4096x2160p @60Hz 8bit 4:4:4Long Cable Mode Forced Resolution on H2X Matrix: 1920x1080p @60Hz 12bit |
HDMI 15m/49ft 7m/23ft 3m/10ft 7m/23ft 3m/10ft 7m/23ft 7m/23ftNA |
Cat6 100m/328ft 100m/328ft 70m/230ft 70m/230ft NA 70m/230ft NA140m/460ft |
Cat6a/7 100m/328ft 100m/328ft 100m/328ft 100m/328ft NA 100m/328ft NA140m/460ft |
Note: WyreStorm recommends the use of shielded category cable to minimize signal noise and interference.
| Supported Standards | DCI | RGB | HDR | HDR10 | Dolby Vision up to 30Hz | HLG | BT.2020 | BT.2100 |
| Maximum Pixel Clock | 297mHz |
Communication and Control
| HDMI | HDCP 2.2 | EDID (Configurable) | DVI-D supported with adapter (not included) |
| HDBaseT | HDMI | HDCP 2.2 | EDID (Configurable) | CEC | Bidirectional IR, RS-232, and Ethernet |
| Ethernet | 2x 8-pin RJ-45 female | 10/100 Mbps auto-negotiating | API Receiver Configuration | Bidirectional over HDBaseT |
| IR | 1x IR TX 3.5mm (1/8in) TS Mono | 1x IR RX 3.5mm (1/8in) TRS Stereo | Transmitted over HDBaseT |
| RS-232 | 1x 3-pin Phoenix Connector | API Receiver Configuration | Bidirectional over HDBaseT when used with H2X matrix |
| ARC (Audio Return Channel) | Returns audio from displays built-in applications via ARC HDMI Input over HDBaseT |
Power
| Power Supply | Input: 100~240V AC 50/60Hz | Output: 12V DC 2A |
| Max Power Consumption | 16.4W |
Environmental
| Operating Temperature | 32°F ~ 113°F (0°C ~ 45°C) | 10% ~ 90%, non-condensing |
| Storage Temperature | -4°F to ~ 158°F (-20°C ~ +70°C) | 10% ~ 90%, non-condensing |
| Maximum BTU | 55.96 BTU/hr |
Dimensions & Weight
| Rack Units/Wall Box | <1U |
| Height | 25mm/1in |
| Width | 234.4mm/9.23in |
| Depth | 143.5mm/5.65in |
| Weight | 0.66kg/1.45lbs |
Regulatory
| Safety and Emission | CE | FCC | RoHS |
CAB-HAOC-10
