Navigate by Brand
Locate Product by Category or Brand
100m 4K60 HDBaseT DSC Receiver with USB
SKU: RX-700
Utilizing the best in HDBaseT technology, the RX-700 extends 5-Play functionality to your display device over 100m/328ft of Cat6 cable. Using DSC (display stream compression) the RX-700 can support HDMI video up to 2160p 4:4:4 at 60Hz without any visual loss in quality or latency. With HID’s and data transfer in mind, the RX-700 supports data transmission of USB 2.0 devices like HD webcams, smart whiteboards and flash drives alike.
CLASS C HDBASET
Featuring the powerful HDBaseT 2.0 specification, UHD video & audio, Ethernet, control, USB and PoH are sent over distances of 100m/328ft. VESA recognized DSC at the point of transmission means lossless compression for HDMI & DP++ signals up to 18Gbps.
USB 2.0 PASS-THROUGH
HDBaseT™ 2.0 affords the addition of USB 2.0 pass-through, offering not only KVM functionality for extension of a keyboard/mouse or touchscreen but also full data transfer capabilities of 190Mbps for webcams or USB peripherals.
HDMI 2.0 MAXED OUT!
Sporting an 18Gbps HDMI input, the RX-700 can support all UHD video signals up to and including 2160p 4:4:4/60, and high frame-rate HDR 12bit 4:2:2 up to 60Hz, along with multichannel audio up to DTS:X and Dolby Atmos.
DEDICATED AUDIO LANE
Running in parallel to and completely separate to the HDMI signal within the HDBaseT link, the RX-700 can also support the bi-directional transmission of 2 separate stereo audio feeds, to and from the RX-700.
Technical Specifications
AUDIO & VIDEO
Inputs
1x HDBT In: 8-pin RJ45
Outputs
1x HDMI Out: 19-pin Type A Female
Output Video Encoding
HDBaseT Class C | PAM16 Encoding
Encoding Data Rate
10.2Gbps
End to End Latency
10μs (micro seconds)
Audio Formats
2ch PCM | Multichannel LPCM | DTS-X | Dolby Atmos
Video Resolution (Max)
1920x1080p @60Hz
2560x1440p @144Hz
3840x2160p @60Hz 8bit 4:4:4
3840x2160p @60Hz 10bit 4:2:0 HDR
3840x2160p @60Hz 12bit 4:2:2 HDR
Supported Standards
DCI | RGB | HDR | HDR10 | Dolby Vision up to 30Hz | HLG | BT.2020 | BT.2100
Maximum Pixel Clock
HDMI: 600MHz | HDBaseT: 340MHz
COMMUNICATION & CONTROL
HDMI
(v2.0b) TMDS | 600MHz Maximum with DSC (Display Stream Compression)
IR
1x IR RX: 3.5mm (1/8in) TRS Stereo | 1x IR TX: 3.5mm (1/8in) TS Mono
RS-232
1x RS-232: 3-pin Phoenix
HDCP
Pass-Through, 2.3 Supported
EDID
Pass-Through, RX > TX
USB
1x Type B (host) | 4x Type A (device)*
USB direction must be set using switch before operation
USB hub compatible | Maximum: 7 devices, 23 endpoints
Maximum uplink speed: 190Mbps
*USB direction must be set using switch before operation
Ethernet
1x Ethernet: 8-pin RJ-45 Female | Bidirectional over HDBaseT | 100Mbps Supported
Consumer Electronics Control (CEC)
One-way display trigger from TX
Auto Low Latency Mode (ALLM)
Supported
Variable Refresh Rate (VRR)
Supported
POWER
Power Supply
18V DC 3A
Max Power Consumption
10W
Additional Features
- HDBaseT Receiver supporting:
- Content up to 4K/60 4:4:4 & RGB 8-bit
- The latest HDR standards, including HDR-10, HLG and Dolby Vision at 30Hz
- HDCP 2.3 encryption technology ensuring compatibility with the latest 4K UHD content and sources
- HD Multichannel audio up to DTS:X and Dolby Atmos to all outputs
- 2160p 4:4:4 or 4:2:2 12-bit HDR content from a source to a display or projector using HDBaseT up to 100m/328ft
- Automatically activated DSC lossless compression handles HDMI content up to 17.8Gbps
- HDMI output supports bandwidths of up to 18Gbps
- Compatible with DVI-I and DP++ v1.3 signals from compatible devices
- Bidirectional USB 2.0 passthrough offering 190Mbps transfer and HID extension
- Features 4 USB device ports
- 10/100 Ethernet port for extension of LAN from TX
- Bidirectional audio lane separate to HDMI signal sends and receives analog audio signals at either end (requires supporting TX device)
- Bidirectional IR, RS-232 and CEC communication
- DIP Switch selection for direction of USB control, long cable mode and firmware update
- Backwards compatible with HDBaseT 1.0 transmission and receiving devices (lowest denominator takes priority)
- LED indication for power supply to units, signal status to show established display connection, HDCP presence in signal and transmission link
- 2-way PoH (Power over HDBaseT) enables the receiver to be remotely powered by the transmitter or power a transmitter
- Locking DC power jack
- 12v DC PSU with US, UK, EU & AU Power cables included
- Mounting brackets included
In the Box
- 1x RX-700 Receiver
- 1x IR Emitter
- 1x IR Receiver
- 1x 3-pin Terminal Block
- 1x 12V DC 3A Power Supply (US/UK/EU/AU)
- 2x Mounting Brackets
- 1x Quickstart Guide
Related Products
Login as partner to view prices
MODEL: SW-510-TX
Login as partner to view prices
MODEL: SW-130-TX-US
Login as partner to view prices
MODEL: SW-130-TX-UK