Navigate by Brand
Locate Product by Category or Brand
70m 4K60 HDBaseT™ Receiver with ARC
SKU: RXV-70-4K-ARC
With high-framerate HDR-10 and HLG technology exceeding the capabilities of HDBaseT, WyreStorm has implemented light-compression technology. The RXV-70-4K-ARC forms part of this new generation of signal extension technology and furthermore, frees the 5.1 audio from an ARC compatible TV and sends back to an H2XC matrix over HDBaseT; an optical S/PDIF input is also present for sending digital audio signals.
AUDIO RETURN TECHNOLOGY
The RXV-70-4K-ARC can transmit multi-channel digital audio from the TV location back to the matrix device for onward connection to an AVR or multi-room amplifier.
HDMI & OPTICAL AUDIO RETURN OPTIONS
Audio Return is selectable between HDMI or S/PDIF optical input which allows for audio from a TV without ARC support to send audio to the transmitter or matrix.
HDMI VIDEO MAXED OUT!
Always looking ahead, WyreStorm can handle both current & future video content technologies. The highest possible bandwidth that currently exists according to the HDMI 2.0 specification can still be sent using HDBaseT and the latest in lossless compression technology from the matrix to this device.
CLASS A HDBASET
Receives HDBT transmissions of 4K up to 70m/230ft and 1080p up to 100m/328ft with multi-channel audio, control, ethernet and PoH also supported
- Uses WyreStorm’s proprietary compression technology for lossless transmission of 4K HDR content, without latency
- Supports ARC via HDMI or optical input for audio return over HDBaseT
- Selector switch for ARC (via HDMI) or Optical Return via Toslink
- Reliable HDBaseT-HDMI conversion over distance using single Cat6 cable
- 4K HDR signals up to 70m/230ft (2160p 4:4:4 60Hz 8-bit) and 2K signals up to 140m/459ft (1200p 60Hz)
- Supports HDMI2.0 video standard up to 18Gbps
- Compatible with HDR standards including HDR-10, HDR-10+, HLG and Dolby Vision™ (Dolby Vision supported up to 30Hz)
- Class A HDBaseT supporting the transmission of video, multichannel audio, Ethernet, bidirectional control and PoH
- Powered remotely via PoH from H2XC matrix
- Bidirectional IR supported with both IR TX & RX ports
- RS-232 port for routed 2-way serial communication
- Supports Ethernet pass-through from matrix (Class A HDBaseT transmission only)
- LED indication for HDCP presence within signal and transmission link between devices
- Ventilated steel chassis
- HDCP 2.2 compatible
- Compact design for convenient and unobtrusive installation
- Wall mounting brackets and IR accessories included
Audio and Video
| Inputs | 1x S/PDIF In: TOSLINK (Digital Optical) 1x HDBaseT In: 8-pin RJ-45 Female |
| Outputs | 1x HDMI Out: 19-pin type A |
| Output Video Encoding | HDBaseT Class A |
| Encoding Data Rate | 10Gbps |
| End to End Latency | 10μs (micro seconds) |
| Audio Formats | 2ch PCM | Multichannel: LPCM and Up to DTS-X and Dolby Atmos |
| Video Resolutions (Max) | Video Resolutions 1920x1080p @60Hz 12bit 3840x2160p @24Hz 10bit 4:2:0 HDR 3840x2160p @30Hz 8bit 4:4:4 3840x2160p @60Hz 10bit 4:2:0 HDR 3840x2160p @60Hz 10bit 4:2:0 HDR 4096x2160p @60Hz 8bit 4:2:0 4096x2160p @60Hz 8bit 4:4:4 |
HDMI 15m/49ft 7m/23ft 7m/23ft 5m/16ft 3m/10ft 7m/23ft 3m/10ft |
Cat6 100m/328ft 70m/230ft 70m/230ft 70m/230ft 70m/230ft 70m/230ft 70m/230ft |
Cat6a/7 100m/328ft 100m/328ft 100m/328ft 100m/328ft 100m/328ft 100m/328ft 100m/328ft |
| Note: WyreStorm recommends the use of shielded category cable to minimize signal noise and interference. |
| Supported Standards | DCI | RGB | HDR | HDR10 | Dolby Vision up to 30Hz | HLG | BT.2020 | BT.2100 |
| Maximum Pixel Clock | HDMI: 600MHz | HDBaseT: 297MHz |
Communication and Control
| HDMI | HDCP 2.2 | EDID | CEC | DVI-D supported with adapter (not included) |
| HDBaseT | HDMI | HDCP 2.2 | EDID | CEC | 1-way PoH to Receiver | Bidirectional IR |
| CEC | Power Triggering from Matrix | Requires CEC compatibility at Display |
| Ethernet | 1x Ethernet: 8-pin RJ-45 Female | Bidirectional over HDBaseT |
| IR | 1x IR RX 3.5mm (1/8in) TRS Stereo | 1x IR TX: 3.5mm (1/8in) TS Mono | Bidirectional over HDBaseT |
| RS-232 | 1x RS-232: 3-pin Phoenix | Bidirectional over HDBaseT |
| ARC (Audio Return Channel) | Supports True ARC (via HDMI) or S/PDIF optical return from display to the matrix over HDBaseT |
Power
| Power Supply | 18V DC (Optional) |
| PoH | 48V 15.4W |
| Max Power Consumption | 12.5W |
Environmental
| Operating Temperature | 0°C to 45°C (32°F to 113°F) |
| StorageTemperature | -20°C to 70°C (-4°F to 158°F) |
| Maximum BTU | 43 BTU/hr |
Dimensions and Weight
| Rack Units | <1U |
| Height With | 21mm/0.83in |
| Width With | 195mm/7.68in |
| Depth With | 94.8mm/3.74in |
| Weight | 0.4kg/0.88lbs |
Regulatory
| Safety and Emission | CE | FCC | RoHS | RCM |
CAB-HAOC-10
TX-H2X-VLC
