4-Input 4K HDBaseT Switcher with USB
SKU: SW-510-TXWhen the next generation of HDBaseT transmission meets WyreStorm’s presentation switcher platform, the result is this powerful switching transmitter, perfect for corporate meeting and classroom environments. Automatic switching inputs with USB host extension and CEC triggering mean an autonomous experience with no user input required.

4-INPUT SWITCHING EXTENDER
A flagship in our PRO range and a first for our switching extenders, the SW-510-TX brings a wide range of premium features into one powerful meeting space solution. Supporting USB routing to both HDMI and DP inputs, this extender accepts HDMI, DisplayPort and USB3.1c sources with a VGA +audio input for legacy devices. Additionally, the SW-510-TX adds support for 4K content and HDCP 2.2 protected content.

4-INPUT SWITCHING EXTENDER
A flagship in our PRO range and a first for our switching extenders, the SW-510-TX brings a wide range of premium features into one powerful meeting space solution. Supporting USB routing to both HDMI and DP inputs, this extender accepts HDMI, DisplayPort and USB3.1c sources with a VGA +audio input for legacy devices. Additionally, the SW-510-TX adds support for 4K content and HDCP 2.2 protected content.
ADDITIONAL RECEIVER INPUTS
When the meeting room is in an idle state, the receiver can switch to either of its HDMI inputs which can be used for anything from a signage player to a satellite receiver, keeping the screen active and displaying content. These inputs can also be triggered manually at any time should a Chromecast or AppleTV be fitted for screen mirroring.


ADDITIONAL RECEIVER INPUTS
When the meeting room is in an idle state, the receiver can switch to either of its HDMI inputs which can be used for anything from a signage player to a satellite receiver, keeping the screen active and displaying content. These inputs can also be triggered manually at any time should a Chromecast or AppleTV be fitted for screen mirroring.

CONDITION-BASED RELAYS BUILT INTO RX
With autonomy in mind, this “meeting-room-in-a-box” can be configured to automatically trigger motorized devices within the room. The relays will open or close depending on the status of the transmitter, meaning that upon a source connection being made, the meeting room will come to life with projector screens appearing and window blinds closing.

CONDITION-BASED RELAYS BUILT INTO RX
With autonomy in mind, this “meeting-room-in-a-box” can be configured to automatically trigger motorized devices within the room. The relays will open or close depending on the status of the transmitter, meaning that upon a source connection being made, the meeting room will come to life with projector screens appearing and window blinds closing.
USB 2.0 PASS-THROUGH
HDBaseT2.0 affords the addition of USB 2.0 pass-through, offering not only KVM functionality for extension of a keyboard/mouse or touchscreen but also full data transfer capabilities. Furthermore, allowing 2 host devices to be connected, the extender can route USB traffic depending on the currently selected source at the receiver.


USB 2.0 PASS-THROUGH
HDBaseT2.0 affords the addition of USB 2.0 pass-through, offering not only KVM functionality for extension of a keyboard/mouse or touchscreen but also full data transfer capabilities. Furthermore, allowing 2 host devices to be connected, the extender can route USB traffic depending on the currently selected source at the receiver.
Technical Specifications
Additional Features
AUDIO & VIDEO
Inputs
1x VGA In: 15-pin VGA
1x Display Port In: DisplayPort 1.3
1x HDMI In: 19-pin type A
1x Audio In: 3.5mm (1/8in) TRS Stereo
1x Line In: 3.5mm (1/8in) TRS Stereo
Outputs
1x HDMI Out: 19-pin type A
1x HDBT Out: 8-pin RJ-45 Female
Video Encoding
HDBaseT™ Class C
Encoding Data Rate
9.2Gbps
End to End Latency
10μs (micro seconds)
Audio Formats
2ch Analog/PCM | Multichannel: LPCM
Video Resolution (Max)
1920x1080p @60Hz 8bit
1920x1200p @60Hz 8bit
3840x2160p @30Hz 8bit 4:4:4
4096x2160p @60Hz 8bit 4:2:0
Supported Standards
DCI | RGB
Maximum Pixel Clock
297MHz
COMMUNICATION & CONTROL
HDMI
HDMI | HDCP 2.2 | EDID | DVI/D supported with adapter (not included)
HDBaseT
HDMI | HDCP 2.2 | EDID | CEC | 2ch audio | USB
RS-232
1x RS-232 (Control): 3-pin Phoenix | 1x RS-232 (Passthrough): 3-pin Phoenix
Ethernet
2x 8-pin RJ-45 female | Bidirectional over HDBaseT™
IR
1x IR RX: 3.5mm (1/8in) TS Mono
USB
1x USB-C: USB 3.1 Audio/Video2x USB Host: USB-B | 3x USB Device: USB-A
POWER
Power Supply
12V DC 2A
Max Power Consumption
14.02W
- Professional switching transmitter for education or corporate meeting rooms
- Automatic or manual switching between HDMI, VGA, DisplayPort and USB-C inputs
- Bidirectional USB2.0 for connection of webcams, smart touchscreens and microphones
- USB-C input supports Alt-mode functionality for AV and USB device connection through a single cable
- Automatic or manual CEC triggering for compatible connected screens or projectors
- Supports source content up to 4K/60 4:2:0 with HDCP 2.2
Technical Specifications
AUDIO & VIDEO
Inputs
1x VGA In: 15-pin VGA
1x Display Port In: DisplayPort 1.3
1x HDMI In: 19-pin type A
1x Audio In: 3.5mm (1/8in) TRS Stereo
1x Line In: 3.5mm (1/8in) TRS Stereo
Outputs
1x HDMI Out: 19-pin type A
1x HDBT Out: 8-pin RJ-45 Female
Video Encoding
HDBaseT™ Class C
Encoding Data Rate
9.2Gbps
End to End Latency
10μs (micro seconds)
Audio Formats
2ch Analog/PCM | Multichannel: LPCM
Video Resolution (Max)
1920x1080p @60Hz 8bit
1920x1200p @60Hz 8bit
3840x2160p @30Hz 8bit 4:4:4
4096x2160p @60Hz 8bit 4:2:0
Supported Standards
DCI | RGB
Maximum Pixel Clock
297MHz
COMMUNICATION & CONTROL
HDMI
HDMI | HDCP 2.2 | EDID | DVI/D supported with adapter (not included)
HDBaseT
HDMI | HDCP 2.2 | EDID | CEC | 2ch audio | USB
RS-232
1x RS-232 (Control): 3-pin Phoenix | 1x RS-232 (Passthrough): 3-pin Phoenix
Ethernet
2x 8-pin RJ-45 female | Bidirectional over HDBaseT™
IR
1x IR RX: 3.5mm (1/8in) TS Mono
USB
1x USB-C: USB 3.1 Audio/Video2x USB Host: USB-B | 3x USB Device: USB-A
POWER
Power Supply
12V DC 2A
Max Power Consumption
14.02W
Additional Features
- Professional switching transmitter for education or corporate meeting rooms
- Automatic or manual switching between HDMI, VGA, DisplayPort and USB-C inputs
- Bidirectional USB2.0 for connection of webcams, smart touchscreens and microphones
- USB-C input supports Alt-mode functionality for AV and USB device connection through a single cable
- Automatic or manual CEC triggering for compatible connected screens or projectors
- Supports source content up to 4K/60 4:2:0 with HDCP 2.2
In the Box
- 1x SW-510-TX Transmitter
- 1x 12V DC Power Supply (US/UK/EU)
- 1x IR Receiver
- 2x Mounting Brackets
- 1x 3-pin Screw Down Phoenix Connector
- 1x 4-pin Screw Down Phoenix Connector
- 1x Quickstart Guide