Navigate by Brand
Locate Product by Category or Brand
4-Input 4K60 DSC HDBaseT Switcher with USB
SKU: SW-740-TX
Utilizing the best in HDBaseT technology, the SW-740-TX harnesses the power of the Class C specification to deliver 5-play functionality over 100m/328ft of Cat6 cable. 4K/UHD video, Ethernet, Control & Power (PoH) can be sent to a remote display location via a compatible receiver whilst USB2.0 device data can be fed back via the USB host or USB-C ports to a connected source. The SW-740-TX has 4 switchable source inputs: 2 HDMIs supporting 18Gbps video up to 2160p 8-bit RGB/4:4:4 thanks to DSC compression, VGA, and USB-C supporting not only 4K/30 video, but device data from the connected receiver and device charging; the stereo audio input can be assigned to the VGA source or sent separately to the receiver.
2160P 4:4:4
The two available HDMI inputs support full 4K 18Gbps bandwidth transmissions, making this presentation switcher ready for any source you connect. The USB-C input supports alt-mode, meaning that a single cable supports, 4K video transmission and two-way data communication.
SCALING
Featuring built-in scaling at the switcher, the HDMI and HDBaseT output will automatically scale depending on the connected screen’s capability. Connect a 4K screen to the HDBaseT output and use the HDMI output to connect a 1080p confidence monitor without affecting the source input.
DEVICE CHARGING
Through the available USB-C input, connect you device and forget the need to worry about your battery. The SW-740-TX supports up to an incredible 20V charging, so whether you plug in your smartphone or laptop, you’ll get charged while you present.
Full HDBaseT Solution
Using the best of HDBaseT 2.0 technology, the SW-740-TX is a full 5 Play solution. With DSC technology, USB passthrough, ethernet, control and Power over HDBaseT, this switcher is the ultimate presentation solution.
Technical Specifications
AUDIO & VIDEO
Inputs
1x VGA In: 15-pin VGA
1x USB-C
2x HDMI In: 19-pin type A
1x Audio In: 3.5mm (1/8in) TRS Stereo
Outputs
1x HDMI Out: 19-pin type A
1x Audio Out: 3.5mm (1/8in) TRS Stereo
1x HDBT Out: 8-pin RJ-45 Female
Video Encoding
HDBaseT™ Class C
Encoding Data Rate
9.2Gbps
End to End Latency
10μs (micro seconds)
Audio Formats
2ch and multichannel LPCM
Video Resolution (Max)
1920x1080p @60Hz 8bit
1920x1080p @60Hz 16bit
3840x2160p @60Hz 8bit 4:4:4
4096x2160p @60Hz 8bit 4:4:4
Supported Standards
DCI | RGB
Maximum Pixel Clock
600MHz
COMMUNICATION & CONTROL
HDMI
HDMI | HDCP 2.2 | EDID | CEC | DVI/D supported with adapter (not included)
HDBaseT
HDMI | HDCP 2.2 | EDID | CEC | 2ch audio | USB | Serial
RS-232
1x 4-pin Phoenix (Control)
Ethernet
1x 8-pin RJ-45 female | Bidirectional over HDBaseT™
IR
1x 4-pin Phoenix (Pass-through)
USB
1x USB-C: USB 3.1
1x USB Host: USB-B
Data Rate: 190Mbps
CEC
Auto, Manual Display Power through HDMI & HDBT Output
Other
PIR Sensor: 1x 4-pin Phoenix
Contact Input: 1x 5-pin Phoenix
Tally Output: 1x 5-pin Phoenix
POWER
Power Supply
24V DC 6.66A
Max Power Consumption
Standard: 45W | With USB Charging: 110W
USB-C
Max. 20V charging (65W)
Additional Features
- Automatic or manual switching of 4 connected sources (VGA, 2 HDMI & USB-C) with assignable USB host connection
- Extended functions from USB-C port allow alt-mode for AV & USB host connectivity and device charging up to 3A over a single cable
- VESA recognized DSC compression technology enables extension of content up to 4K/60 8-bit to 100m/328ft
- Powerful output scaling matches video transmission to displays connected via HDBaseT & mirrored HDMI
- Includes input for separate analog audio device independent of HDMI signal for transmission to receiver
- PIR input allows automatic room triggering depending on occupancy
- USB-Type B Host connection for USB extension in KVM application when used with a compatible Class C HDBT receiver (RX-700 recommended)
- Intuitive Web UI for management, setup and maintenance with HTTPS encryption (Telnet over TLS and SSH available in future update)
- Automatic or manual CEC triggering of connected display through HDMI or HDBaseT output.
In the Box
- 1x SW-740-TX Presentation Switcher
- 2x 5-pin Terminal Block
- 3x 4-pin Terminal Block
- 1x 24V DC 5A Power Supply (US/UK/EU/AU)
- 2x Mounting Brackets
- 1x Quickstart Guide
