Navigate by Brand
Locate Product by Category or Brand
2.8″ Serial Control Color Touchscreen
SKU: TS-280-EU
Introducing the TS-280 to the WyreStorm range. The 2.8” colour touchscreen can control any product within the WyreStorm range; whether it be a presentation switcher or matrix. With ease of use in mind the TS-280 is as easy to use as it is to set up, with pre-configured UI’s ready to upload in just seconds via the MicroSD card slot on the rear.
The UI’s are simple to use with large buttons clearly labeled for each major function and navigation controls (where applicable) to move between pages. Using a standard RJ45 connection on the rear and RS-422 communication, the TS-280 also comes with an in-line RS-422 to RS-232 converter which doubles as a power-injector if used with a product that doesn’t feed the 12v power.
TOUCHSCREEN INTERFACE
Instantly identified as a simple control interface yet giving the appearance that a sophisticated control system is behind the scenes, the 2.8” touchscreen simplifies matters by firstly removing the expensive processor within a control system and secondly sending serial commands directly to the switcher via Cat5e cable
INTUITIVE & SIMPLE USER CONTROL
Why use a sledge hammer to crack a walnut? When a full control system processor is considered over-kill for a small classroom or meeting space, the TS-280 has you covered. Aside from the automatic operation of the WyreStorm switcher, basic functions such as switching and CEC triggering can be controlled from this simple interface touch.
SIMPLE SETUP
The pre-configured UI’s for the TS-280 align with all WyreStorm presentation switcher products, offering a quick & easy solution when manual control of the meeting or education space is required. Once downloaded from the website, the UI file can be uploaded and ready to go in less than 30 seconds.
EXTENDED RANGE
Using RS-422 communication between the touchscreen and the interface module means that even the longest of cable runs can be accommodated; up to 100m/328ft between control point and switcher. Power can either be drawn directly from a compatible switcher or via 12v PSU connected to the interface module.
- 2.8” color touchscreen perfect for WyreStorm switcher control
- Backlit with automatic power off and wake on touch
- Pre-configured UI’s designed for simple end-user experience
- Easy update: Download UI from wyrestorm.com and load via MicroSD card
- RJ45 connection and RS-422 communication to included RS-232 converter
- 300m/984ft transmission range to host device
Communication and control
| Touchscreen | Touchscreen Interface Module | |
| Switcher Control | 1x RS-422: 8-pin RJ-45 Female | 1x RS-232: 4-pin Phoenix |
| Max Communication Distance | 100m/328ft Interface to Touchscreen | 15.24m/50ft Switcher to Interface |
Power
| Power Supply | 12VDC from Touchscreen Interface Module | 12VDC from switcher or seperate PSU (not included) |
| Max Power Consumption | 0.84W | 0.36W |
Environmental
| Operating Temperature | 0 to + 45°C (32 to + 113 °F), 10% to 90%, non-condensing |
| Storage Temperature | -20 to +70°C (-4 to + 158 °F), 10% to 90%, non-condensing |
| Maximum BTU | Transmitter: 24 BTU/hr | Receiver: 58 BTU/hr |
Dimensions & Weight
| Rack Units | Wall Box | 2 Gang | <1U |
| Height | 86mm/3.39in | 25mm/0.99in |
| Width | 147mm/5.79in | 80.2mm/3.16in |
| Depth | 32.1mm/1.27in | 50mm/1.97in |
| Weight | 0.28kg/0.62lbs | 0.14kg/0.31lbs |
Regulatory
| Safety and Emission | CE | FCC | RoHS |
5 YEAR WARRANTY
This WyreStorm Pro AV product comes with a 5 Year Warranty
CENTRO-CM
Compact PoE Control Gateway with IR, Contact Closures & RS-232
CENTRO-C
Control Gateway with IR, RS-232, Contact Closures & PIR Sensors