- Low profile chassis of 18mm/0.7” for easier, more convenient installations in tight spaces
- Transmits discrete wide-band bidirectional IR control signal/routed serial commands (from compatible matrix) together within the HDMI signal over a single Cat5e/6
- Robust Class A HDBaseT transmission technology for stable 4K/HD distribution and control resistant to electrostatic and environmental interference compared to conventional UTP transmission
- Distribution of video (4K & 1080p), multichannel audio, bidirectional IR, POH power and 10/100 Ethernet over single Cat5e/6
- Multichannel audio supports 7.1 DTS Master HD and Dolby True HD
- HDMI v2.0 with HDCP 2.2
- Full 3D compatibility up to 1080p
- Switchable RS-232 selection for firmware update
- Power options – additional phoenix port and threaded DC for use of both standard and locking DC power plugs
- Visual LED indication for power supply, signal status to show display connection, HDCP in signal and Link between HDBaseT devices
- Automatically adjusts feedback, equalization and amplification of signal
- Energy efficient universal power supplies included
- Mounting brackets and IR connections included
70m 4K HDBaseT™ Transmitter
SKU: TX-70-4KFor flagship HDBaseT Transmission performance, look no further than the TX-70-4K. Class A HDBaseT transmission means support for 4K UHD content; even HDR-10 @24Hz, up to 70m/230ft. 2-way PoH and EDID management completes this fully-loaded specification.

CLASS A HDBASET™ TRANSMISSION
Sends HDMI signals of 4K UHD with HDR up to 70m/230ft and 1080p up to 100m/328ft with multi-channel audio, control, ethernet and PoH.

2-WAY POH
The TX-70-4K can either be powered by a PoH-compatible matrix or presentation switcher, or can itself deliver power to a receiver device such as the WyreStorm HDBaseT RX-70-4K or in cases where audio de-embed is required, the RX-70-4K-ARC.

CONTROL OPTIONS
Supports 2 methods of control pass-through. The TX-70-4K can handle both bi-directional IR and RS-232 when used as part of a compatible WyreStorm matrix or extender system.

ON-BOARD EDID MANAGEMENT
Offering 2 methods of EDID communication, the TX-70-4K is as capable with invisible communication as it is with the 4K video that you can see. An installer can select EDID passthrough from the connected screen/projector, or decide to use one of the embedded options for maximum flexibility.
Audio and Video
Inputs | 1x HDMI In: 19-pin HDMI type A female |
Outputs | 1x HDBaseT™ Out 8-pin RJ-45 female |
Output Video Encoding | HDBaseT™ Class A |
Audio Formats | 2ch PCM | Up to DTS-X and Dolby Atmos |
Video Resolutions (Max) | Video Resolution 1920x1080p @60Hz 12bit 1920x1080p @60Hz 16bit 3840x2160p @30Hz 8bit 4:4:4 3840x2160p @24Hz 10bit 4:2:0 HDR 4096x2160p @60Hz 8bit 4:2:0 4096x2160p @60Hz 8bit 4:4:4 |
HDMI 15m/49ft 7m/23ft 7m/23ft 3m/9.8ft 7m/23ft 7m/23ft |
Using Cat6 100m/328ft 70m/230ft 70m/230ft 70m/230ft 70m/230ft 70m/230ft |
Using Cat6a/7 100m/328ft 100m/328ft 100m/328ft 100m/328ft 100m/328ft 100m/328ft |
Color Depth (Max) | 12bit |
Maximum Pixel Clock | 297mHz |
Communication and Control
HDMI | HDMI | HDCP 2.2 | EDID | DVI/D supported with adapter (not included) |
HDBaseT | HDMI | HDCP 2.2 | EDID | 2-way PoH | Bidirectional IR, RS-232, and Ethernet |
Ethernet | 1x 8-pin RJ-45 female | 10/100 Mbps auto-negotiating | Bidirectional over HDBaseT™ |
IR | 1x IR TX 3.5mm (1/8in) TS Mono | Bidirectional over HDBaseT 1x IR RX 3.5mm (1/8in) TRS Stereo | Bidirectional over HDBaseT |
RS-232 | 1x 3-pin Phoenix Connector | Bidirectional over HDBaseT |
Power
Power Supply | Input: 100~240V AC 50/60Hz | Output: 12V DC 2A |
PoH | 48V 15.4W |
Max Power Consumption | 26.5W |
Environmental
Operating Temperature | 32°F ~ 113°F (0°C ~ 45°C)10% ~ 90%, non-condensing |
Storage Temperature | -4°F to ~ 158°F (-20°C ~ +70°C)10% ~ 90%, non-condensing |
Maximum BTU | 90.42 BTU/hr |
Dimensions & Weight
Rack Units/Wall Box | <1U |
Height | 24.9mm/0.99in |
Width | 220mm/8.67in |
Depth | 89.9mm/3.54in |
Weight | 0.52kg/1.14lbs |
Regulatory
Safety and Emission | CE | FCC | RoHS |