H2XC Card: HDMI In, 4K HDBaseT Out, Mirrored HDMI Out
SKU: TX-H2X-HDMIThe standard transmission card found in the H2X platform, the TX-H2X-HDMI transmits 4K UHD signals from 70m/230ft over its Class A HDBaseT output and features an HDMI output that mirrors HDBaseT. The HDMI output is perfect for connecting to a local monitor, AVR, or signal extension via extender product or one of WyreStorm’s Hybrid Active Optical Cables (HAOC).

18GBPS BACKPLANE
The highest possible bandwidth that currently exists according to the HDMI 2.0 specification can be managed by the TX-H2X-HDMI and sent over distance. Newly emerging 60Hz HDR-10 & Dolby Vision content can also be handled by this powerful future-ready device.

18GBPS BACKPLANE
The highest possible bandwidth that currently exists according to the HDMI 2.0 specification can be managed by the TX-H2X-HDMI and sent over distance. Newly emerging 60Hz HDR-10 & Dolby Vision content can also be handled by this powerful future-ready device.
4K UHD WITH HDR OVER HDBASET™
Multi-zone transmission of HDR-10 content is nothing new to WyreStorm; we’ve been sending this high-bandwidth content, native & uncompressed over long distances since the introduction of our first H2 extender in 2015. The H2X is no different and with the TX-H2X-HDMI, sending pixel-perfect 4K UHD 4:2:0 10-bit @24Hz at distances up to 100m/328ft.


4K UHD WITH HDR OVER HDBASET™
Multi-zone transmission of HDR-10 content is nothing new to WyreStorm; we’ve been sending this high-bandwidth content, native & uncompressed over long distances since the introduction of our first H2 extender in 2015. The H2X is no different and with the TX-H2X-HDMI, sending pixel-perfect 4K UHD 4:2:0 10-bit @24Hz at distances up to 100m/328ft.

AUDIO DSP
No two rooms or even installations are the same. That’s why we’ve coupled to each audio zone output; a powerful audio DSP, which allows an integrator to have complete control over the audio configuration. Also, a 10-band equalizer, level trim and variable delay, which can be set per zone for a truly customized room-by-room balance.

AUDIO DSP
No two rooms or even installations are the same. That’s why we’ve coupled to each audio zone output; a powerful audio DSP, which allows an integrator to have complete control over the audio configuration. Also, a 10-band equalizer, level trim and variable delay, which can be set per zone for a truly customized room-by-room balance.
CLASS A HDBASET™ WITH MIRRORED HDMI
Experience the robust signal transmission of Class A HDBaseT™ technology the TX-H2X-HDMI has to offer, with superior signal transmission of 4K of up to 70m/230ft and 1080p up to 100m/328ft, with compatible Class A HDBaseT receivers. If that wasn’t enough, the TX-H2X-HDMI also includes an additional HDMI output that can mirror it’s respective HDBaseT output to connect to an additional monitor or AV receiver, or to be used in its singular form to output HDMI’s full potential of 18Gbps transmission.


CLASS A HDBASET™ WITH MIRRORED HDMI
Experience the robust signal transmission of Class A HDBaseT™ technology the TX-H2X-HDMI has to offer, with superior signal transmission of 4K of up to 70m/230ft and 1080p up to 100m/328ft, with compatible Class A HDBaseT receivers. If that wasn’t enough, the TX-H2X-HDMI also includes an additional HDMI output that can mirror it’s respective HDBaseT output to connect to an additional monitor or AV receiver, or to be used in its singular form to output HDMI’s full potential of 18Gbps transmission.
Technical Specifications
Additional Features
AUDIO & VIDEO
Inputs
1x HDMI In: 19-pin type A
1x HDMI Out: 19-pin type A
1x S/PDIF In: S/PDIF Coaxial Digital
Outputs
1x HDBaseT™ Out: 8-pin RJ-45 female
1x S/PDIF Out: S/PDIF Coaxial Digital
1x Audio Out: 3-pin Phoenix
Video Encoding
HDBaseT™ Class A
End to End Latency
10μs (micro seconds)
Audio Formats
S/PDIF: 2ch PCM | Multichannel: Up to 5.1 DTS and Dolby Digital
HDMI: 2ch PCM | Multichannel: LPCM and Up to DTS-X and Dolby Atmos
Video Resolution (Max)
1920x1080p @60Hz 16bit
3840x2160p @30Hz 8bit 4:4:4
3840x2160p @60Hz 10bit 4:2:0 HDR
4096x2160p @60Hz 8bit 4:4:4
Maximum Pixel Clock
HDMI: 600MHz | HDBaseT™: 297MHz
COMMUNICATION & CONTROL
HDMI
HDCP 2.2 | EDID | DVI-D supported with adapter (not included)
HDBaseT
HDMI | HDCP 2.2 | EDID | 1-way PoH to Receiver | IR RX to Receiver
IR
1x IR RX 3.5mm (1/8in) TRS Stereo | To Receiver over HDBaseT™
RS-232
From Matrix – No Connection on card | Bidirectional over HDBaseT™
Ethernet
From Matrix – No Connection on card | Bidirectional over HDBaseT™
Audio Return Channel
(ARC)
Supported
POWER
Power Supply
Internal to Matrix
Max Power Consumption
Matrix Dependent
- 18Gbps HDMI input
- HDBaseT Output – transmitting Class A HDBaseT which includes video, audio, control and power up to 70m/230ft of 4K and 100m/328ft of 1080p
- HDMI Output – mirrored to HDBaseT to allow additional connection of a local display device, AVR or to extend with a hybrid active optical HDMI cable (HAOC)
- Stereo Audio Output – offering stereo audio breakout of a zone with a 3-pin phoenix connector for analog audio
- S/PDIF output supporting 5.1 audio content de-embedded from sources or ARC from connected zones
- S/PDIF Audio Input – another way to inject digital audio to take advantage of the H2X platform’s powerful audio matrix and DSP.
- IR RX – allows control signals to be sent to the sink device
Technical Specifications
AUDIO & VIDEO
Inputs
1x HDMI In: 19-pin type A
1x HDMI Out: 19-pin type A
1x S/PDIF In: S/PDIF Coaxial Digital
Outputs
1x HDBaseT™ Out: 8-pin RJ-45 female
1x S/PDIF Out: S/PDIF Coaxial Digital
1x Audio Out: 3-pin Phoenix
Video Encoding
HDBaseT™ Class A
End to End Latency
10μs (micro seconds)
Audio Formats
S/PDIF: 2ch PCM | Multichannel: Up to 5.1 DTS and Dolby Digital
HDMI: 2ch PCM | Multichannel: LPCM and Up to DTS-X and Dolby Atmos
Video Resolution (Max)
1920x1080p @60Hz 16bit
3840x2160p @30Hz 8bit 4:4:4
3840x2160p @60Hz 10bit 4:2:0 HDR
4096x2160p @60Hz 8bit 4:4:4
Maximum Pixel Clock
HDMI: 600MHz | HDBaseT™: 297MHz
COMMUNICATION & CONTROL
HDMI
HDCP 2.2 | EDID | DVI-D supported with adapter (not included)
HDBaseT
HDMI | HDCP 2.2 | EDID | 1-way PoH to Receiver | IR RX to Receiver
IR
1x IR RX 3.5mm (1/8in) TRS Stereo | To Receiver over HDBaseT™
RS-232
From Matrix – No Connection on card | Bidirectional over HDBaseT™
Ethernet
From Matrix – No Connection on card | Bidirectional over HDBaseT™
Audio Return Channel
(ARC)
Supported
POWER
Power Supply
Internal to Matrix
Max Power Consumption
Matrix Dependent
Additional Features
- 18Gbps HDMI input
- HDBaseT Output – transmitting Class A HDBaseT which includes video, audio, control and power up to 70m/230ft of 4K and 100m/328ft of 1080p
- HDMI Output – mirrored to HDBaseT to allow additional connection of a local display device, AVR or to extend with a hybrid active optical HDMI cable (HAOC)
- Stereo Audio Output – offering stereo audio breakout of a zone with a 3-pin phoenix connector for analog audio
- S/PDIF output supporting 5.1 audio content de-embedded from sources or ARC from connected zones
- S/PDIF Audio Input – another way to inject digital audio to take advantage of the H2X platform’s powerful audio matrix and DSP.
- IR RX – allows control signals to be sent to the sink device
In the Box
- TX-H2X-HDMI Transmission Card